500 GPD Whole House Reverse Osmosis System

SKU : CQE-CO-02024

In stock

CRYSTAL QUEST Reverse Osmosis systems are ruggedly designed and manufactured for dependable and simple operation. These units provide a higher output of continuous quality de-mineralized water. RO units are completely assembled and shipped ready for a trouble-free installation and start up. All units are factory tested prior to delivery to ensure quality and performance.

CRYSTAL QUEST Reverse Osmosis systems are ruggedly designed and manufactured for dependable and simple operation. These units provide a higher output of continuous quality de-mineralized water. RO units are completely assembled and shipped ready for a trouble-free installation and start up. All units are factory tested prior to delivery to ensure quality and performance.

Our RO systems remove 93-95% of Fluoride and are capable of removing drug residues and virtually all pharmaceutical contaminants from water! If using for a home this system will likely require the purchase of a pressurized holding tank and possibly an alkalizer. Please contact us before purchase for details. 


Membrane:

CRYSTAL QUEST 500 GPD Reverse Osmosis System

 
  • Two 2.5" x 21" TFC membranes
  • 3.2 GPM brass rotary vane pump, coupled directly to the motor
  • 1/2 HP motor - 110 Volts 60 Hertz or 220 Volts 50 Hertz.
  • Aluminum frame, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 10" 5 micron sediment and one 4.5" x 10" carbon block pre-filters.
  • One 2.5" 0-300 psi panel gauge and two 1.5" 0-160 psi top mount gauges
  • Low pressure switch - (Safety device to protect the pump from running dry).
  • Solenoid valve with manual override. 110 Volt 60 Hertz, or 220 Volt 50 Hertz.
  • One 1/4" brass needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • Manual on/off switch

System Specifications

Design

Vertical

Gallons Per Day

500 @ 70 F

Dimensions (Approx.)

14" x 20" x 27"

Weight (Approx.)

65 lbs.

Concentrate Re-Circulate

Optional

Auto Flush

N/A

Element Size (in.)

2521 TFC HF1

Elements (Qty.)

2

Motor HP

1/3

Voltage

110 or 220 Volts AC

Hertz

60 or 50 cycle

Feed Connection

3/4"

Product Connection

3/8"

Waste Connection

3/8"

 

Operating Specifications

Minimum Feed Pressure

35 psi

Minimum NaCl - % Rejection

96%

Minimum Feed (GPM)

1.5

Maximum Hardness

15 Grains / Gallon

Maximum TDS

2000 ppm

Operating Pressure

150 psi

Maximum NaCl - % Rejection

98.5%

Maximum Feed (GPM)

3

pH Range

3 - 11

Maximum Temperature

1050 F

Two 2.5" x 21" TFC HF1 Membranes, For maximum rejection of impurities and high flow.

Membrane Housing: Two 2.5" x 21" Champ membrane housings, Features a patented design and requires no tools for servicing.
Pump: One 401 Fluid-O-Tech 2.3 GPM brass rotary vane pump, Directly couples to the motor, and designed for continuous high pressures.
Motor: One 1/3 HP GE motor, 110 or 220 Volts AC, 60 or 50 hertz.
Frame: Aluminum, White Powder Coated, Corrosion resistant, and light weight.
Sediment Filter: One 4.5" x 10" Big White 5 micron sediment filter, Removes sediments and protects the system.
Carbon Block: One 4.5" x 10" Big White 10 micron carbon block, Removes chlorine, odor, and taste from incoming feed water.
Filter Housing: Two 4.5" x 10" Big Grey double O-ring filter housings, Offers durability and improved sealing capabilities.
Pressure Gauges: One 2.5" Gauge, 0-300 PSI, Panel Mounted Glycerin filled, and Two 1.5" Gauge, 0-160 PSI, top mount dry gauges, For monitoring the system's operating pressure, the filter and carbon operating pressure.
Low Pressure Switch: One McCann's Low Pressure Switch, Safety device to protect the pump from running dry when there is insufficient feed water pressure.
Solenoid Valve: One Solenoid Valve with manual override, 110 or 220 Volts AC, 60 or 50 hertz, Assists with the on/off functionality of the system.
Manual Flush Valve: One 1/4" brass needle valve, Regulates the product to waste ratio (systems recovery).
Switch: One manual on/off Switch.
Easy Maintenance & Operation: feature a compact design and have all of their components strategically located for easy access and inspection.


Optional Features
 
Stainless Steel Housings: Two 2.5" x 21" PuroTech stainless steel membrane housings, 3/8" FNPT.
 
High Pressure Switch: One Square D high pressure switch, Automatically starts when the tank pressure falls below 40 psi, and stops when the pressure reaches 60 psi.
 
TDS Meter: One panel mount TDS meter, provides you with accurate readings of the feed and product water quality.
 
Float Switch: One mechanical float switch, For atmospheric storage tank applications.
 
Flow Meters: One Product (0-2 GPM) & one waste (0-5 GPM) flow meters, enables operator to accurately adjust product to waste ratio and monitor systems performance.
 
Concentrate Re-Circulate: This feature offers a higher recovery rate for the system by taking a percentage of the waste water and feeding it back into the system.
SKU CQE-CO-02024
Country of Manufacture United States
On Sale No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Add text...