
2-7/8" x 20" Cation Resin Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. How long this cartridge lasts depends on how hard your water is. Once the resin is full, the hardness it was holding back returns, and the spots on your glassware tell you first.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A softening cartridge filled with cation resin that reduces the calcium and magnesium hardness behind scale.
- Reduces hardness and scale
- Rated for 2,080 grains
- Typical life: set by your hardness
- Measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing
Replacement cartridge, 2-7/8 x 20 in
Softer water and less scale, from a simple cartridge
Hard water leaves white scale on faucets, glassware and kettles. This cartridge is filled with softening resin that takes up the calcium and magnesium behind that scale, with no tank, brine or drain line.
- Reduces hardness and scale
- Rated for 2,080 grains
- Typical life: set by your hardness
- Fits a standard 2.5 x 20 in housing

What a fresh cartridge gives you
Less scale
Fewer white deposits on faucets, glassware, kettles and the appliances the water reaches.
True softening
The resin takes hardness minerals out of the water instead of only conditioning them.
Simple to live with
No tank, brine or drain line. It works in a standard filter housing.
How it works
Cation resin
Softening resin beads in sodium form.
Ion exchange
Calcium and magnesium are captured and a small amount of sodium is released.
Capacity in grains
Divide the grain rating by your hardness in grains per gallon to estimate gallons.
What it reduces
Designed to reduce
- Calcium and magnesium hardness
- Scale deposits from hard water
Not designed for
- Bacteria and viruses
- Chlorine and chemical tastes
- Lead and other heavy metals
- Fluoride
- Nitrate
- Arsenic
Softening adds a small amount of sodium in exchange for the hardness it takes up. Pair it with a carbon block or SMART cartridge for taste and filtration.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing, the size used in our compact whole house systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in | 2.5 x 10 in housing | 0.5 gpm |
| 2-7/8 x 20 in (this cartridge) | 2.5 x 20 in housing | 2.5 gpm |

Specifications
| Part number | CQE-RC-04022 |
|---|---|
| Cartridge size | 2-7/8 x 20 in (actual) |
| Fits | Standard 2.5 x 20 in housing |
| Service flow | 2.5 gpm |
| Hardness capacity | 2,080 grains |
| Typical life | Set by your water hardness |
| Media | Cation exchange resin, sodium form |
| Estimating gallons | Grain rating divided by hardness in grains per gallon (17.1 ppm is 1 grain per gallon) |
| Water temperature | 40 to 145°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04022 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
It depends on your water hardness. Divide the grain rating by your hardness in grains per gallon to estimate the gallons it will treat, and replace it when spots and scale start to return.
- Replace it when spots and scale start to return.
- Replace it sooner if the flow drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Know your hardness. A simple hardness test tells you how many gallons to expect.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Cation Resin Water Softening Cartridge FAQ
How many gallons will a softening cartridge treat?
Divide the grain rating by your hardness in grains per gallon. One grain per gallon is 17.1 ppm.
Does a softening cartridge add sodium?
Yes. Ion exchange trades a small amount of sodium for the calcium and magnesium it takes up. Harder water means more sodium in the treated water.
Can a cartridge soften my whole house?
Only on moderately hard water or light use. For a whole home on hard water, see our whole house systems and softeners.
How often should I replace the softening cartridge?
It depends on your water hardness. Divide the grain rating by your hardness in grains per gallon to estimate the gallons it will treat, and replace it when spots and scale start to return.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
