Compact Whole House Cartridges
These are the replacement cartridges for our compact whole house water filters. Most measure 2-7/8 x 20 in and fit a standard 2.5 x 20 in housing, with a service flow of about 2.5 gallons per minute.
Start with a pleated sediment cartridge to catch grit, then choose the media your water calls for: the SMART cartridge or carbon block for chlorine taste and odor, the fluoride cartridge, or dedicated cartridges for nitrate, arsenic and hardness.
Most cartridges offer Subscribe and save, with 5% off each delivery. Questions? See the FAQ below the products or contact us.
Compact Whole House Cartridge FAQ
What size cartridge does a compact whole house filter take?
Most take a 2-7/8 x 20 in cartridge, which fits a standard 2.5 x 20 in housing. Check the size printed on your current cartridge before you order.
How often should I replace compact whole house cartridges?
Sediment, carbon block and SMART cartridges typically last 12 to 24 months. A whole house uses far more water than a single tap, so replace them sooner if flow, pressure, taste or odor changes.
Which cartridge should come first?
A sediment cartridge goes first. It catches grit before it can clog the finer, more costly stages that follow.
Can a cartridge system soften water for the whole house?
A softening cartridge suits moderately hard water or light use. For a whole home on hard water, see our whole house systems and softeners.
Can I have cartridges delivered automatically?
Yes. Most cartridges offer Subscribe and save. Choose it when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
How do I replace a cartridge?
Turn off the water and release the pressure, unscrew the housing with its wrench, swap the cartridge, check the O-ring, close the housing and turn the water on slowly. Then check for leaks and flush the new cartridge. Each product page has full steps in its Replacement Schedule tab.
