
2-7/8" x 9-3/4" Fluoride/Multi Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Most households replace this cartridge about once a year. After that, the fluoride and chlorine it was filtering start coming back through, and only the chlorine has a taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
One cartridge that pairs aluminum oxide fluoride media with SMART carbon and redox media for chlorine taste and odor.
- Reduces fluoride and chlorine
- Typical life: about 12 months
- Measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing
Replacement cartridge, 2-7/8 x 9-3/4 in
Fluoride and chlorine, handled by one cartridge
If your city adds fluoride and disinfects with chlorine, you are filtering for two very different things. This cartridge pairs aluminum oxide for fluoride with SMART carbon and redox media for chlorine taste and odor, with no animal-derived media.
- Reduces fluoride and chlorine
- Two treatments in one cartridge
- Typical life: about 12 months
- Fits a standard 2.5 x 10 in housing

What a fresh cartridge gives you
Two treatments, one cartridge
Aluminum oxide for fluoride, plus SMART media for chlorine taste and odor.
No animal-derived media
The fluoride media is synthetic aluminum oxide, not bone char.
Fine particle pads
Two 1 micron pads hold the media in place and catch fine particles.
How it works
Aluminum oxide
Holds fluoride on its surface by adsorption and chemical reaction.
Coconut shell carbon
Adsorbs chlorine, taste, odor and organic chemicals.
Copper-zinc redox media
Adds chlorine reduction and helps with some dissolved metals.
What it reduces
Designed to reduce
- Fluoride (inorganic fluoride in municipal water)
- Chlorine taste and odor
- Some dissolved metals
- Some dissolved organic chemicals
- Fine particles
Not designed for
- Nitrate
- Arsenic, as a dedicated stage
- Water hardness
- Total dissolved solids (TDS)
- Bacteria and viruses
Prefer bone char? See the SMART + Calcium GAC fluoride cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing, the size used in our countertop, under sink and refrigerator systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in (this cartridge) | 2.5 x 10 in housing | 0.5 gpm |

Specifications
| Part number | CQE-RC-04049 |
|---|---|
| Cartridge size | 2-7/8 x 9-3/4 in (actual) |
| Fits | Standard 2.5 x 10 in housing |
| Service flow | 0.5 gpm |
| Typical life | About 12 months for most households |
| Media | Aluminum oxide, coconut shell carbon, copper-zinc redox alloys |
| Filter pads | Two 1 micron pads |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04049 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
Customer Reviews
When to replace it
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
- Replace it sooner if a fluoride test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Fluoride has no taste. A simple fluoride test of your filtered water tells you how the media is doing.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Fluoride/Multi SMART Filter Cartridge FAQ
What is inside the Fluoride/Multi cartridge?
Aluminum oxide fluoride media combined with coconut shell carbon, copper-zinc redox alloys and two 1 micron filter pads.
How is it different from the SMART + Calcium GAC cartridge?
The fluoride media. This cartridge uses aluminum oxide. The SMART + Calcium GAC cartridge uses bone char.
Can I use it for fluoride in well water?
It is made for the inorganic fluoride in municipal water. For fluoride from a well or another natural source, contact us first.
How often should I replace the fluoride cartridge?
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
