
2-7/8" x 9-3/4" Nitrate/Multi Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. How long this cartridge lasts depends on the nitrate in your water and how much you use. Once the resin is full, the nitrate it was filtering starts coming back through, and nitrate has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
One cartridge that pairs nitrate-selective resin with SMART carbon and redox media for chlorine taste and odor.
- Reduces nitrate and chlorine
- Typical life: set by your nitrate level
- Measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing
Replacement cartridge, 2-7/8 x 9-3/4 in
Nitrate and chlorine, handled by one cartridge
This cartridge pairs nitrate-selective resin with SMART carbon and redox media. One stage reduces nitrate, and the other takes care of chlorine taste and odor and low levels of iron and hydrogen sulfide.
- Reduces nitrate and chlorine
- Two treatments in one cartridge
- Typical life: set by your nitrate level
- Fits a standard 2.5 x 10 in housing

What a fresh cartridge gives you
Two treatments, one cartridge
Nitrate-selective resin, plus SMART carbon and redox media.
Holds up with sulfate
The resin favors nitrate, so sulfate in the water does not crowd it out.
Better taste
The carbon and redox media reduce chlorine and its taste and odor.
How it works
Nitrate-selective resin
Swaps each nitrate ion it captures for a chloride ion.
Coconut shell carbon
Adsorbs chlorine, taste, odor and organic chemicals.
Copper-zinc redox media
Adds chlorine reduction and helps with low levels of iron and hydrogen sulfide.
What it reduces
Designed to reduce
- Nitrate
- Chlorine taste and odor
- Ferrous iron and hydrogen sulfide at low levels
- Some heavy metals
- Some dissolved organic chemicals
Not designed for
- Bacteria and viruses
- Fluoride
- Arsenic
- Water hardness
- Total dissolved solids (TDS)
Wells with nitrate should also be tested for bacteria, since both can come from the same sources.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing, the size used in our countertop, under sink and refrigerator systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in (this cartridge) | 2.5 x 10 in housing | 0.5 gpm |

Specifications
| Part number | CQE-RC-04050 |
|---|---|
| Cartridge size | 2-7/8 x 9-3/4 in (actual) |
| Fits | Standard 2.5 x 10 in housing |
| Service flow | 0.5 gpm |
| Typical life | Depends on your nitrate level and water use |
| Media | Nitrate-selective resin, coconut shell carbon, copper-zinc redox alloys |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04050 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
There is no single calendar interval. Life depends on your nitrate and sulfate levels, your flow and how much water you use. Test the filtered water regularly and replace the cartridge when nitrate starts to rise.
- Replace it when a nitrate test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Test the filtered water for nitrate on a regular schedule. Nitrate has no taste, smell or color.
- Do not apply a carbon cartridge schedule to nitrate resin. Its life is set by your water.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Nitrate/Multi SMART Filter Cartridge FAQ
What does the Nitrate/Multi cartridge add to nitrate resin?
Coconut shell carbon and copper-zinc redox media, which reduce chlorine taste and odor and low levels of iron and hydrogen sulfide.
Does a nitrate cartridge work on well water?
Yes. Well water is where most nitrate problems show up. Test your well for nitrate and for bacteria, since both can come from the same sources.
Does it make well water microbiologically safe?
No. The resin does not disinfect. If your well tests positive for bacteria, add a UV sterilizer or other disinfection.
How often should I replace the nitrate cartridge?
There is no single calendar interval. Life depends on your nitrate and sulfate levels, your flow and how much water you use. Test the filtered water regularly and replace the cartridge when nitrate starts to rise.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
