
36 GPM Ultraviolet Water Sterilizer System
In stock
The 36 GPM Ultraviolet Water Sterilizer System uses ultraviolet light to treat your water as it flows, designed for a 99.99 percent reduction of bacteria, viruses and protozoa without chemicals.
- Treats up to 36 GPM, for large homes and commercial use.
- 304 stainless steel chamber with three UV lamps, about 9,000 hours each.
- Lamp life display, replacement indicator and audible failure alarm.
- No chemicals and no retention tank.
The 36 GPM Ultraviolet Water Sterilizer System treats up to 36 gallons per minute with ultraviolet light, designed for a 99.99 percent reduction of bacteria, viruses and protozoa without adding chemicals to your water.
It is sized for large homes, multi-unit buildings and commercial or industrial flow rates, installed after your sediment or whole house filtration.
The reactor chamber is 304 stainless steel with axial flow, and each of the three hard glass germicidal lamps lasts about 9,000 hours, roughly one year of continuous use. Each lamp sits in its own quartz sleeve, and the controller shows total running time and remaining lamp life, with a lamp replacement indicator and an audible alarm if a lamp fails.

How UV treatment works
Water flows through the stainless steel chamber past the UV lamps. Ultraviolet light disrupts the DNA of bacteria, viruses and protozoa so they cannot reproduce. Treatment happens as the water flows, with no retention tank and no chemicals, and it does not change the taste or odor of your water.
What it treats
- Bacteria such as E. coli and coliform
- Viruses
- Protozoa such as Giardia and Cryptosporidium
UV light does not reduce chemicals, heavy metals, fluoride, chlorine or sediment, so pair it with a filter for those. For best results, install it after sediment filtration and make sure your water is clear, since iron, hardness or cloudiness can shield microorganisms from the light. For fluoride, see our whole house filters.
Features
- Treats up to 36 gallons per minute.
- 304 stainless steel reactor chamber with axial flow.
- Three hard glass germicidal lamps, each in a quartz sleeve, rated about 9,000 hours.
- Audible lamp failure alarm and LED power indicator.
- Lamp replacement indicator, total running time and remaining lamp life display.
- No chemicals, no retention tank and no change to taste or odor.
- Works on well water and city water.
- 110 to 130V, 50 to 60 Hz.
Choose your size
| Model | Flow rate | Lamps | Price |
|---|---|---|---|
| 1 GPM Ultraviolet Water Sterilizer System | 1 GPM | 1 | $169.00 |
| 6 GPM Ultraviolet Water Sterilizer System | 6 GPM | 1 | $389.00 |
| 8 GPM Ultraviolet Water Sterilizer System | 8 GPM | 1 | $499.00 |
| 12 GPM Ultraviolet Water Sterilizer System | 12 GPM | 1 | $569.00 |
| 24 GPM Ultraviolet Water Sterilizer System | 24 GPM | 2 | $1,799.00 |
| 36 GPM Ultraviolet Water Sterilizer System (this model) | 36 GPM | 3 | $2,069.00 |
| 48 GPM Ultraviolet Water Sterilizer System | 48 GPM | 4 | $2,369.00 |
| 60 GPM Ultraviolet Water Sterilizer System | 60 GPM | 5 | $2,969.00 |
| 72 GPM Ultraviolet Water Sterilizer System | 72 GPM | 6 | $3,269.00 |
| 84 GPM Ultraviolet Water Sterilizer System | 84 GPM | 7 | $3,469.00 |
Choose a flow rate at or above the peak flow of the line you are treating. Contact us if you would like help sizing a system.
Specifications
| Model | 36 GPM Ultraviolet Water Sterilizer System (CQE-UV-00106) |
|---|---|
| Flow rate | 36 GPM |
| Dimensions | 7" x 14" x 40" |
| Electrical | 110 to 130V, 50 to 60 Hz |
| Max operating pressure | 125 psi |
| UV lamps | 3 |
| Lamp life | About 9,000 hours (about one year of use) |
| Reactor | 304 stainless steel, axial flow |
| Audible lamp failure alarm | Yes |
| LED power indicator | Yes |
| Lamp replacement indicator | Yes |
| Running time and lamp life display | Yes |
| Shipping weight | 75 lb |
Installation
Install the system on the cold water line after your sediment and whole house filters, as the last stage of treatment, and plug it into a standard outlet. Leave enough clearance at the end of the chamber to remove the lamps. Keep the unit powered on at all times, and disinfect the plumbing after installation so the lines past the unit start clean. Need a 220V model, or help with sizing? Contact us.
Replacement lamp
- UV Lamp 12 GPM, which fits the 12 to 84 GPM systems (this system uses 3)
Replace the lamp about every 12 months, even if it still lights, since UV output drops over time. See the Replacement Schedule tab for details.
| SKU | CQE-UV-00106 |
|---|---|
| Country of Manufacture | United States |
| Dimensions | 7" x 14" x 40" |
| On Sale | No |
Parts in this system
- UV Lamp 12 GPM (3 lamps): replace about every 12 months, or about 9,000 hours of use, even if the lamp still lights.
- Quartz sleeve: inspect and clean it each time you change the lamp.
- Sediment pre-filter: change it on its own schedule so water reaching the UV chamber stays clear.
Questions about timing? Contact us.
Common questions
What does a UV water sterilizer do?
It treats water with ultraviolet light as it flows through a stainless steel chamber. The 36 GPM Ultraviolet Water Sterilizer System is designed for a 99.99 percent reduction of bacteria, viruses and protozoa, without chemicals and without changing taste or odor.
What size do I need?
Choose a flow rate at or above the peak flow of the line you are treating. For a whole house, size it to the most water your home uses at once, with several fixtures running. Contact us if you would like help choosing.
Do I need a filter before it?
Yes. UV works best on clear water, so install it after sediment filtration. Iron, hardness or cloudiness can shield microorganisms from the light.
How often do I replace the lamp?
About every 12 months. Each lamp is rated about 9,000 hours, and UV output drops with age even while the lamp still lights. The replacement for this system is the UV Lamp 12 GPM.
Does it reduce fluoride or chemicals?
No. UV treats microorganisms only. For fluoride, chlorine, heavy metals and chemicals, pair it with one of our whole house filters or fluoride water filters.
