
4-5/8" x 20" Multi Stage PLUS Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the chlorine and metals it was filtering start coming back through, and you taste it in every glass.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A multi stage cartridge that layers coconut carbon, catalytic carbon, redox media and ion exchange resin to reduce chlorine, chloramine, heavy metals and more.
- Reduces chlorine, chloramine and heavy metals
- Rated for 160,000 gallons
- Typical life: 12 to 24 months
- Measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing
Replacement cartridge, 4-5/8 x 20 in
One cartridge, many layers of filtration
City water picks up chlorine or chloramine at the treatment plant and can gather metals from the pipes on its way to you. The SMART cartridge layers several filter media in one housing to reduce them together, for water that tastes clean and is a pleasure to drink.
- Reduces chlorine, chloramine and heavy metals
- Rated for 160,000 gallons
- Typical life: 12 to 24 months
- Fits a standard 20 in Big Blue housing

What a fresh cartridge gives you
Fresh taste, no chemical edge
Reduces chlorine and chloramine and the taste and odor they cause.
Broad filtration
Also reduces heavy metals, VOCs, THMs, pesticides and herbicides.
Long service life
Rated for 160,000 gallons and typically 12 to 24 months of use.
How it works
Coconut and catalytic carbon
Adsorb chlorine, break down chloramine and take up organic chemicals.
Copper-zinc redox media
Two alloys: one for chlorine, one for ferrous iron and hydrogen sulfide.
Ion exchange resin
A potable-grade resin that is selective for heavy metals.
Ceramic, tourmaline and a 1 micron pad
Condition the water and catch fine particles at the base.
What it reduces
Designed to reduce
- Chlorine and chloramine
- Heavy metals, including lead and mercury
- VOCs and THMs
- Pesticides and herbicides
- Pharmaceutical residues
- Ferrous iron and hydrogen sulfide at low levels
Not designed for
- Fluoride
- Nitrate
- Arsenic
- Water hardness
- Total dissolved solids (TDS)
- Bacteria and viruses
For fluoride as well, see the SMART + Calcium GAC fluoride cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing, the size used in our high flow whole house systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in | 2.5 x 10 in housing | 0.5 gpm |
| 2-7/8 x 20 in | 2.5 x 20 in housing | 2.5 gpm |
| 4-5/8 x 9-3/4 in | 10 in Big Blue housing | 3 gpm |
| 4-5/8 x 20 in (this cartridge) | 20 in Big Blue housing | 6 gpm |

Specifications
| Part number | CQE-RC-04030 |
|---|---|
| Cartridge size | 4-5/8 x 20 in (actual) |
| Fits | Standard 20 in Big Blue housing |
| Service flow | 6 gpm |
| Rated capacity | 160,000 gallons |
| Typical life | 12 to 24 months |
| Media | Coconut shell carbon, catalytic carbon, copper-zinc redox alloys, ion exchange resin, ceramic and tourmaline |
| Pre-filter pad | 1 micron |
| Operating pressure | 20 to 60 psi |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04030 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
- Replace it sooner if the taste or odor of your water changes.
- Replace it sooner if the flow or pressure drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- If your system holds two SMART stages, replace them together so they age together.
- As a reverse osmosis pre-filter on chlorinated city water, change it once a year to protect the membrane.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
SMART Plus Multi Stage Filter Cartridge FAQ
What is the difference between SMART Plus, Ultra and Ultimate?
They use the same family of media in different ratios for different capacities. In the 2-7/8 x 9-3/4 in size, Plus is rated for 10,000 gallons, Ultra for 20,000 gallons and Ultimate for 30,000 gallons.
Does the SMART cartridge reduce chloramine?
Yes, it is designed to. It pairs coconut carbon with catalytic carbon, which breaks chloramine down.
Does SMART replace a water softener or reverse osmosis?
No. Hardness, dissolved solids and fluoride call for a dedicated stage.
Is carbon dust in the first water normal?
Yes. A little fine carbon dust in the first gallons is normal and clears with the flush.
How often should I replace the SMART cartridge?
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
