
2-7/8" x 20" Arsenic Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. This cartridge is rated by the gallon, so its life depends on how much water you use. Once the media is spent, the arsenic it was filtering starts coming back through, and arsenic has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
An arsenic reduction cartridge filled with iron-based media designed for both arsenic V and arsenic III.
- Reduces arsenic V and arsenic III
- Rated for 3,000 gallons
- Typical life: set by rated gallons
- Measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing
Replacement cartridge, 2-7/8 x 20 in
A dedicated stage for arsenic in well water
Arsenic occurs naturally in groundwater, and no utility is testing a private well for it. This cartridge is filled with an iron-based media designed for both forms of arsenic, in a standard filter housing with no electricity, drain line or chemicals.
- Reduces arsenic V and arsenic III
- Rated for 3,000 gallons
- Typical life: set by rated gallons
- Fits a standard 2.5 x 20 in housing

What a fresh cartridge gives you
Arsenic reduction where you drink
A dedicated stage for arsenic at the kitchen tap or on the line that feeds it.
Both forms of arsenic
The media is designed for arsenic V (arsenate) and arsenic III (arsenite).
Simple to live with
No electricity, drain line or chemicals. It works in a standard filter housing.
How it works
Iron-based media
Granules of iron hydroxide with a strong attraction for arsenic.
Adsorption
Arsenic binds to the media surface as water passes and stays there.
Replace when spent
There is nothing to regenerate. A fresh cartridge restores full capacity.
What it reduces
Designed to reduce
- Arsenic V (arsenate)
- Arsenic III (arsenite)
Not designed for
- Bacteria and viruses
- Nitrate
- Fluoride
- Water hardness
- Iron
- Chlorine and chemical tastes
Phosphate and sulfate compete for the same sites on the media and shorten its life. For chlorine and taste as well, see the Arsenic/Multi cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing, the size used in our compact whole house systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in | 2.5 x 10 in housing | 0.5 gpm |
| 2-7/8 x 20 in (this cartridge) | 2.5 x 20 in housing | 2.5 gpm |

Specifications
| Part number | CQE-RC-04021 |
|---|---|
| Cartridge size | 2-7/8 x 20 in (actual) |
| Fits | Standard 2.5 x 20 in housing |
| Service flow | 2.5 gpm |
| Rated capacity | 3,000 gallons (at under 100 ppm hardness) |
| Typical life | Set by the rated gallons and your water use |
| Media | Iron hydroxide arsenic media |
| Regeneration | None. Replace when spent |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04021 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Plan the change from the rated gallons for this size and your daily water use, then confirm with an arsenic test of the filtered water. Because it has no taste or smell, a water test is the reliable way to know when the media is spent.
- Replace it when the rated gallons are used.
- Replace it when an arsenic test of the filtered water shows the level rising.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Test the filtered water for arsenic on a regular schedule.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Arsenic Filter Cartridge FAQ
Does it reduce both arsenic III and arsenic V?
The media is designed for both forms. Arsenic V is captured most readily.
Is this a good arsenic cartridge for well water?
Yes. Wells are where most arsenic shows up, because no utility is treating or testing the water. Start with an arsenic test.
Why does phosphate matter?
Phosphate is chemically similar to arsenic and competes for the same sites on the media, which shortens its life.
How do I know when the cartridge is spent?
Test the filtered water. Replace the cartridge when arsenic starts to rise or the rated gallons are used, whichever comes first.
How often should I replace the arsenic cartridge?
Plan the change from the rated gallons for this size and your daily water use, then confirm with an arsenic test of the filtered water. Because it has no taste or smell, a water test is the reliable way to know when the media is spent.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
