
4-5/8" x 20" Calcium GAC Fluoride Reduction Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Most households replace this cartridge about once a year. After that, the fluoride it was filtering starts coming back through, and fluoride has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A fluoride reduction cartridge filled with Calcium GAC, a natural bone char media that locks fluoride into its mineral structure.
- Reduces fluoride in city water
- Rated for 15,000 ppm of fluoride
- Typical life: about 12 months
- Measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing
Replacement cartridge, 4-5/8 x 20 in
Fluoride reduction with natural bone char
Standard carbon filters are not designed for fluoride. Bone char is the media we use as standard for it. Its mineral structure reacts with fluoride and locks it in as water passes, and its carbon surface also adsorbs some heavy metals.
- Reduces fluoride in city water
- Rated for 15,000 ppm of fluoride
- Typical life: about 12 months
- Fits a standard 20 in Big Blue housing

What a fresh cartridge gives you
Fluoride reduction at the tap
Targets the inorganic fluoride added to municipal water.
A natural mineral reaction
Fluoride swaps into the mineral in bone char and is held there.
Bonus adsorption
The carbon and mineral surfaces also adsorb some heavy metals, such as lead.
How it works
Bone char
A black granular media that is 70 to 76 percent hydroxyapatite, a calcium mineral.
Mineral exchange
Fluoride reacts with the hydroxyapatite and stays in the media.
Carbon surface
About a tenth of the media is carbon, which adsorbs some metals and organic compounds.
What it reduces
Designed to reduce
- Fluoride (inorganic fluoride in municipal water)
- Heavy metals such as lead
- Some dissolved organic and colored compounds
Not designed for
- Chlorine and chemical tastes, as a dedicated stage
- Nitrate
- Water hardness
- Bacteria and viruses
For chlorine as well, see the SMART + Calcium GAC cartridge. Prefer a media with no animal source? See the aluminum oxide fluoride cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing, the size used in our high flow whole house systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in | 2.5 x 10 in housing | 0.5 gpm |
| 4-5/8 x 20 in (this cartridge) | 20 in Big Blue housing | 6 gpm |

Specifications
| Part number | CQE-RC-04129 |
|---|---|
| Cartridge size | 4-5/8 x 20 in (actual) |
| Fits | Standard 20 in Big Blue housing |
| Service flow | 6 gpm |
| Fluoride capacity | 15,000 ppm of fluoride (at under 100 ppm hardness) |
| Typical life | About 12 months for most households |
| Media | Calcium GAC (bone char), 70 to 76% hydroxyapatite |
| Treatment method | Mineral exchange on hydroxyapatite, plus carbon adsorption |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04129 |
|---|---|
| Country of Manufacture | United States |
| Dimensions | 4-5/8” x 20” |
| On Sale | No |
When to replace it
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
- Replace it sooner if a fluoride test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Fluoride has no taste. A simple fluoride test of your filtered water tells you how the media is doing.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Calcium GAC Bone Char Fluoride Filter Cartridge FAQ
Does bone char reduce fluoride in water?
Yes. Fluoride swaps into the hydroxyapatite mineral in bone char and is held there as water passes through.
Is Calcium GAC the same as bone char?
Yes. Calcium GAC is the name of this bone char media.
Is bone char vegan?
No. Bone char is made from cattle bone. The aluminum oxide fluoride cartridge is the alternative with no animal source.
Can I use it for fluoride in well water?
It is made for the inorganic fluoride in municipal water. For fluoride from a well or another natural source, contact us first.
How often should I replace the fluoride cartridge?
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 4-5/8 x 20 in and fits a standard 20 in Big Blue housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
