
2-7/8" x 9-3/4" Fluoride Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Most households replace this cartridge about once a year. After that, the fluoride it was filtering starts coming back through, and fluoride has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A fluoride reduction cartridge filled with aluminum oxide (activated alumina), a mineral media with no animal source.
- Reduces fluoride in city water
- Typical life: about 12 months
- Measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing
Replacement cartridge, 2-7/8 x 9-3/4 in
Fluoride reduction with a mineral media
Standard carbon filters are not designed for fluoride. This cartridge uses aluminum oxide, also called activated alumina, a mineral media that holds fluoride on its surface as water passes. It contains no bone char, which makes it the choice when you prefer a media with no animal source.
- Reduces fluoride in city water
- Mineral media, no bone char
- Typical life: about 12 months
- Fits a standard 2.5 x 10 in housing

What a fresh cartridge gives you
Fluoride reduction at the tap
Targets the inorganic fluoride added to municipal water.
No animal-derived media
Synthetic aluminum oxide granules, not bone char.
Nothing to regenerate
No salt and no backwashing. When the media is spent, you replace the cartridge.
How it works
Aluminum oxide
Porous mineral granules with a large surface for fluoride to bind to.
Adsorption and reaction
Fluoride is held by adsorption and chemical reaction, not by ion exchange.
Unhurried contact
A gentle flow gives the water more time with the media.
What it reduces
Designed to reduce
- Fluoride (inorganic fluoride in municipal water)
- Arsenic
- Lead
Not designed for
- Chlorine and chemical tastes
- Nitrate
- Water hardness
- Bacteria and viruses
For chlorine as well, see the Fluoride/Multi cartridge. Prefer bone char? See the Calcium GAC fluoride cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing, the size used in our countertop, under sink and refrigerator systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in (this cartridge) | 2.5 x 10 in housing | 0.5 gpm |
| 2-7/8 x 20 in | 2.5 x 20 in housing | 2.5 gpm |
| 4-5/8 x 9-3/4 in | 10 in Big Blue housing | 3 gpm |

Specifications
| Part number | CQE-RC-04006 |
|---|---|
| Cartridge size | 2-7/8 x 9-3/4 in (actual) |
| Fits | Standard 2.5 x 10 in housing |
| Service flow | 0.5 gpm |
| Typical life | About 12 months for most households |
| Media | Aluminum oxide (activated alumina) |
| Media pH range | 4 to 10. Capacity is highest in slightly acidic water |
| Free chlorine in feed water | 1 ppm maximum |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04006 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
- Replace it sooner if a fluoride test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Fluoride has no taste. A simple fluoride test of your filtered water tells you how the media is doing.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Aluminum Oxide Fluoride Filter Cartridge FAQ
Is aluminum oxide the same as activated alumina?
Yes. Activated alumina is the water treatment name for the porous aluminum oxide granules in this cartridge.
Aluminum oxide or bone char: which fluoride cartridge should I choose?
Both reduce fluoride in municipal water. Bone char is our standard fluoride media. Aluminum oxide is the alternative with no animal source.
Does the pH of my water matter?
Yes. Aluminum oxide holds the most fluoride in slightly acidic water and its capacity falls as pH rises.
Can I use it for fluoride in well water?
It is made for the inorganic fluoride in municipal water. For fluoride from a well or another natural source, contact us first.
How often should I replace the fluoride cartridge?
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
