2-7/8" x 20" Phosphate & Coconut Shell GAC Filter Cartridge

SKU : CQE-RC-04025

In stock

Subscription details

Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the phosphate is used up, and scale starts building on your fixtures and appliances again.

Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.

A cartridge that pairs phosphate, to help prevent scale, with coconut shell carbon for chlorine taste and odor.

  • Helps prevent scale buildup
  • Typical life: 12 to 24 months
  • Measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing

Replacement cartridge, 2-7/8 x 20 in

Scale control without a softener

Hard water leaves scale on fixtures and inside appliances. The phosphate in this cartridge keeps hardness minerals from settling as scale, and coconut shell carbon in the same cartridge reduces chlorine taste and odor. No salt, no drain, no electricity.

  • Helps prevent scale buildup
  • Coconut carbon for taste
  • Typical life: 12 to 24 months
  • Fits a standard 2.5 x 20 in housing
Phosphate and Coconut Carbon Filter Cartridge, single 2-7/8 x 20 inch cartridge, front view of the tall slim yellow housing

What a fresh cartridge gives you

Less scale

Phosphate keeps hardness minerals from depositing on fixtures and inside appliances.

Nothing to maintain

No salt, no drain line and no electricity.

Better taste

Coconut shell carbon reduces chlorine taste and odor.

12-24Months, typical life
2.5GPM service flow
5%Off with Subscribe and save
USAMade in

How it works

1

Polyphosphate

Dissolves slowly and holds hardness minerals in the water so they do not settle as scale.

2

Not a softener

The minerals stay in the water. They are kept from forming deposits.

3

Coconut shell carbon

Reduces chlorine taste and odor in the same cartridge.

What it does

Designed to

  • Help prevent scale buildup from hard water
  • Reduce chlorine taste and odor

Not designed for

  • Softening (the hardness minerals stay in the water)
  • Fluoride, nitrate and arsenic
  • Lead and other heavy metals
  • Total dissolved solids (TDS)
  • Bacteria and viruses

To take hardness out of the water instead, see the cation resin softening cartridge.

Phosphate and Coconut Carbon Filter Cartridge, close-up of the yellow top end cap with a white gasket around the center opening

Find your size

Match the actual size printed on your current cartridge. This one measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing, the size used in our compact whole house systems.

Cartridge sizeFitsService flow
2-7/8 x 20 in (this cartridge)2.5 x 20 in housing2.5 gpm
Phosphate and Coconut Carbon Filter Cartridge, tall slim yellow cartridge with 2-7/8 inch diameter, 20 inch height callouts

Specifications

Part numberCQE-RC-04025
Cartridge size2-7/8 x 20 in (actual)
FitsStandard 2.5 x 20 in housing
Service flow2.5 gpm
Typical life12 to 24 months
MediaPolyphosphate and coconut shell carbon
Made inUSA

How to replace it

A few minutes, with the wrench that came with your system.

  1. Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
  2. Unscrew the housing with the housing wrench and lift out the used cartridge.
  3. Wash the housing with mild soap and water and rinse it well.
  4. Check that the O-ring is clean and fully seated in its groove.
  5. Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
  6. Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
  7. Turn the water on slowly, check for leaks, then flush the new cartridge before first use.

Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.

SKU CQE-RC-04025
Country of Manufacture United States
On Sale No
Write Your Own Review
You're reviewing: 2-7/8" x 20" Phosphate & Coconut Shell GAC Filter Cartridge
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

When to replace it

Typically every 12 to 24 months. Harder water and heavier use deplete the phosphate faster, so replace it sooner if scale returns.

  • Replace it sooner if new scale appears on fixtures or appliances.
  • Replace it sooner if chlorine taste returns.

How to replace it

  1. Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
  2. Unscrew the housing with the housing wrench and lift out the used cartridge.
  3. Wash the housing with mild soap and water and rinse it well.
  4. Check that the O-ring is clean and fully seated in its groove.
  5. Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
  6. Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
  7. Turn the water on slowly, check for leaks, then flush the new cartridge before first use.

Between changes

  • Check kettles, faucets and appliances for new scale as the cartridge ages.
  • Write the install date on the cartridge label or in your calendar so the next change is easy to time.

Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.

Questions about timing? Contact us.

Phosphate and Coconut Carbon Filter Cartridge FAQ

Does a phosphate cartridge soften water?

No. It does not take hardness minerals out of the water. It keeps them from depositing as scale.

How is it different from a softening cartridge?

A softening cartridge takes up calcium and magnesium by ion exchange. A phosphate cartridge leaves them in the water and inhibits scale.

How often should I replace the phosphate cartridge?

Typically every 12 to 24 months. Harder water and heavier use deplete the phosphate faster, so replace it sooner if scale returns.

Which size do I need?

Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 20 in and fits a standard 2.5 x 20 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.

How do I replace it?

Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.

Can I have replacements delivered automatically?

Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.

Recommended Products

Compact Whole House Fluoride Filter
$586.25
Armour Stainless Steel Fluoride Gravity Water Filter System
$219.99
Slimline Whole House Fluoride Filter
$454.80
Black Fluoride Pitcher Filter
$42.95

Related Products

5 Micron Pleated Sediment Filter Cartridge, 2-7/8 x 20 inch single tall slim white pleated cartridge with blue end caps
$31.50
SMART Plus Multi Stage Filter Cartridge, 2-7/8 x 20 inch, single blue cartridge with white label, front view
$158.00
Shower Filter Cartridge
$29.50
Coconut Carbon Block Filter Cartridge, 2-7/8 x 20 inch single tall gray mesh-wrapped block with white end caps
$31.50