
2-7/8" x 9-3/4" Ceramic Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. The ceramic is built for about 30 monthly cleanings, which is 18 to 24 months of use. After that, cleaning no longer brings the flow back, and you are filtering through a worn surface.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A cleanable 1 micron ceramic cartridge that holds back fine sediment, cysts and many bacteria by physical filtration alone.
- 1 micron ceramic filtration
- Typical life: 18 to 24 months
- Measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing
Replacement cartridge, 2-7/8 x 9-3/4 in
A finer line of defense, with nothing added to your water
This cartridge is a 1 micron ceramic wall, five times finer than a standard sediment filter. It works by size alone, holding back fine sediment, cysts and many bacteria while adding nothing to the water.
- 1 micron ceramic filtration
- Cleanable about 30 times
- Typical life: 18 to 24 months
- Fits a standard 2.5 x 10 in housing

What a fresh cartridge gives you
Finer filtration
The 1 micron ceramic catches particles that a 5 micron sediment filter lets through.
Nothing added
Physical filtration only, with nothing released into the water.
Cleanable
A monthly wipe and cold rinse restores the surface, about 30 times over.
How it works
Ceramic element
A porous ceramic wall rated at 1 micron.
Filtration by size
Anything larger than the pores stays on the outer surface.
A fresh surface
Wiping the outside clears the trapped layer and brings the flow back.
What it reduces
Designed to reduce
- Fine sediment, silt, clay and rust down to about 1 micron
- Asbestos fibers
- Cysts
- Many bacteria, by physical filtration
Not designed for
- Viruses
- Chlorine and chloramine
- VOCs
- Lead and other dissolved metals
- Fluoride and nitrate
- Hardness and TDS
Ceramic is a physical filter, not a treatment for unsafe water. Use it on microbiologically safe water. For chlorine taste and odor, pair it with a carbon block or SMART cartridge.
Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing, the size used in our countertop, under sink and refrigerator systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in (this cartridge) | 2.5 x 10 in housing | 0.5 gpm |

Specifications
| Part number | CQE-RC-04005 |
|---|---|
| Cartridge size | 2-7/8 x 9-3/4 in (actual) |
| Fits | Standard 2.5 x 10 in housing |
| Service flow | 0.5 gpm |
| Typical life | 18 to 24 months |
| Media | Ceramic |
| Micron rating | 1 micron |
| Operating pressure | 30 to 60 psi |
| Water temperature | 40 to 120°F, cold water lines only. Do not freeze |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04005 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Every 18 to 24 months. The ceramic is built for about 30 monthly cleanings. Replace it sooner if it is cracked or chipped, or if cleaning no longer brings the flow back.
- Replace it sooner if the ceramic is cracked or chipped.
- Replace it sooner if cleaning no longer brings the flow back.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- Once a month, wipe the outer ceramic surface with a clean damp cloth and rinse it under cold water.
- Handle it gently. Ceramic can crack if dropped.
- Do not let the cartridge freeze.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Ceramic Filter Cartridge FAQ
How do I clean a ceramic cartridge?
Once a month, shut off the water, take the cartridge out, wipe the whole outer ceramic surface with a clean damp cloth and rinse it under cold water.
Will a ceramic cartridge make unsafe water safe to drink?
No. The 1 micron ceramic wall physically holds back cysts and many bacteria, but viruses are smaller and pass through. Use it on water that is already microbiologically safe.
Does ceramic reduce chlorine, taste or odor?
No. Ceramic is a particle filter. Chlorine, taste and odor are handled by carbon or SMART cartridges.
Ceramic or sediment cartridge: which do I need?
A 5 micron sediment cartridge is the everyday choice for dirt and rust. Ceramic is five times finer and can be cleaned and reused.
How often should I replace the ceramic cartridge?
Every 18 to 24 months. The ceramic is built for about 30 monthly cleanings. Replace it sooner if it is cracked or chipped, or if cleaning no longer brings the flow back.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
