
Faucet Mount Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 6 to 12 months. After that, the chlorine taste and odor it was filtering start coming back through, and your morning coffee notices before you do.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
The six-stage replacement cartridge for our 6-Stage Faucet Mount Water Filter, in chrome or white.
- Reduces chlorine taste and odor
- About 2,000 gallons per cartridge
- Typical life: 6 to 12 months
- Fits our faucet mount filter
Replacement cartridge
Fresh, clean-tasting water from your kitchen tap
This is the sealed six-stage cartridge for our faucet mount water filter. A fresh one brings back the clean taste in your water, coffee and ice, and takes a few minutes to fit.
- Reduces chlorine taste and odor
- About 2,000 gallons per cartridge
- Typical life: 6 to 12 months
- Fits our faucet mount filter

What a fresh cartridge gives you
Water you want to drink
Reduces the chlorine taste and odor in every glass.
Better coffee, tea and cooking
Filtered water lets flavor come through without a chemical edge.
Long life for its size
About 2,000 gallons, typically 6 to 12 months.
How it works
One micron pad
Strains sediment and rust first, which protects the media below.
Six layered stages
Water passes through each stage of media in turn.
Slow by design
About 0.3 gallons per minute, so the water has time with the media.
What it reduces
Designed to reduce
- Chlorine taste and odor
- VOCs
- Trihalomethanes (THMs)
- Heavy metals
- Sediment and rust
Not designed for
- Fluoride
- Nitrate
- Water hardness
- Total dissolved solids (TDS)
- Bacteria and viruses
Use it on cold, microbiologically safe water. For fluoride, see our countertop fluoride filters.

Where it fits
This cartridge fits the 6-Stage Faucet Mount Water Filter in chrome and white. It measures 1.75 x 5 in.

Specifications
| Part number | CQE-RC-04046 |
|---|---|
| Rated capacity | 2,000 gallons |
| Typical life | 6 to 12 months |
| Cartridge size | 1.75 x 5 in |
| Flow rate | About 0.3 gpm |
| Water temperature | Cold water only, 40 to 85°F |
| Made in | USA |
How to replace it
A few minutes, with no tools.
- Unscrew the diverter valve from the faucet to take the filter off.
- Turn the upper housing counterclockwise to open it.
- Lift out the used cartridge, along with the hard white disk and the soft clear inner disk.
- Place the new cartridge in with the micron pad at the top and the disks back in position. Close the housing and screw the filter back onto the faucet.
- Run cold water for 5 to 10 minutes before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04046 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
Customer Reviews
When to replace it
Typically every 6 to 12 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
- Replace it sooner if the taste or odor of your water changes.
- Replace it sooner if the flow or pressure drops.
How to replace it
- Unscrew the diverter valve from the faucet to take the filter off.
- Turn the upper housing counterclockwise to open it.
- Lift out the used cartridge, along with the hard white disk and the soft clear inner disk.
- Place the new cartridge in with the micron pad at the top and the disks back in position. Close the housing and screw the filter back onto the faucet.
- Run cold water for 5 to 10 minutes before first use.
Between changes
- Flip the cartridge about every three months to back-flush the media.
- Use cold water only. Switch the lever to unfiltered before running hot water.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Faucet Mount Filter Cartridge FAQ
Which faucet filter does this cartridge fit?
It fits our 6-Stage Faucet Mount Water Filter in chrome and white.
Can I flip the cartridge?
Yes. About every three months, move the micron pad to the other end, set the disks at the bottom, refit the filter and run water for 3 to 5 minutes. This back-flushes the media.
Does it reduce fluoride?
No. This cartridge is not designed to reduce fluoride.
How often should I replace the faucet mount cartridge?
Typically every 6 to 12 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
How do I replace it?
Unscrew the diverter valve from the faucet to take the filter off. Turn the upper housing counterclockwise to open it. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
