
6-Stage Faucet Mount Water Filter - White
In stock
A compact six-stage filter that fits onto your kitchen faucet by hand and gives you fresh, clean-tasting water for drinking and cooking. Finished in white with a chrome diverter valve.
- Six stages of filtration in one sealed cartridge
- Reduces chlorine taste and odor, VOCs, THMs and heavy metals
- About 2,000 gallons per cartridge, 6 to 12 months for most homes
- Lever switches between filtered and unfiltered water
- Fits by hand in minutes, with no tools or plumbing changes
6-Stage Faucet Mount Water Filter in White
Fresh, clean-tasting water, straight from your kitchen tap
City water is treated with chlorine to keep it safe on the way to your home. By the time it reaches your glass, you can taste it in your water, your coffee and your ice. This compact filter fits onto your kitchen faucet by hand and passes cold water through six stages of filtration, so every glass tastes the way water should.
- Six stages of filtration
- Reduces chlorine taste and odor
- About 2,000 gallons per cartridge
- Fits by hand, no tools

A small upgrade you taste every day
Good water is the base of nearly everything you drink and cook. When it tastes better, it is easier to drink more of it.
Water you want to drink
With less chlorine taste and odor, a glass of water from your own tap becomes something you reach for through the day.
Better coffee, tea and cooking
Filtered water lets the flavor of your coffee, tea, soups and rice come through, without a chemical edge.
Fewer plastic bottles
One cartridge filters about 2,000 gallons. That is the same volume as roughly 15,000 standard 16.9 oz bottles.
How it works
Six stages are layered inside one sealed cartridge, and water passes through each in turn. These are the media that do the work.
One-micron pre-filter pad
Strains sediment and rust first, which keeps the stages below it working well.
Copper-zinc redox media
A copper-zinc alloy that reduces chlorine through a chemical reaction instead of adsorption.
Activated carbon
Adsorbs chlorine taste and odor, along with organic compounds such as VOCs and THMs.
Ion exchange resin
Exchanges ions with the water as it passes, a method widely used to reduce dissolved metals.
Filter pads between the layers hold the media in place and keep the flow even.
What it reduces
Designed to reduce
- Chlorine taste and odor
- Chloramines
- VOCs
- Trihalomethanes (THMs)
- Pesticides
- Heavy metals
- Hydrogen sulfide and sulfur odor
- Sediment and rust
Not designed for
- Fluoride
- Total dissolved solids (TDS)
- Nitrate
- Water hardness
- Bacteria and viruses
Use it on cold, municipally treated water or other water that is microbiologically safe. For fluoride, see our countertop fluoride filters and reverse osmosis systems.

Fits your faucet in minutes
The filter screws onto the end of your faucet in place of the aerator. Faucets with threads on the outside take it directly. For faucets with threads on the inside, adapters and washers are included. Everything tightens by hand, with no tools and no changes to your plumbing.
A lever on the diverter valve lets you choose filtered water for drinking and cooking, or unfiltered water for washing up. That saves the cartridge for where it matters.
In the box
- Filter housing in white with diverter valve
- Six-stage filter cartridge
- Faucet adapters and washers
- Filter change reminder label
It needs a standard faucet with a removable aerator. Pull-out and pull-down sprayer faucets are generally not suitable. Not sure about yours? Contact us.

Made for slow, thorough filtration
Slow by design
This filter works best when water takes its time. Open the cold tap about one third of the way and it delivers about 0.3 gallons per minute, a little over a quart. The slower pace gives the water more contact with the media.
Cold water only
Filter cold water from 40 to 85°F. When you need hot water, turn the lever to unfiltered first, which protects the media inside the cartridge.
Specifications
| Part number | CQE-FM-00500 |
|---|---|
| Type | Faucet mount, point of use |
| Filtration | 6 stages in one sealed cartridge |
| Capacity | About 2,000 gallons, depending on water quality and use |
| Cartridge life | 6 to 12 months |
| Flow rate | About 0.3 gpm (1.1 L per minute) at 60 psi |
| Operating pressure | 20 to 60 psi |
| Water temperature | Cold water only, 40 to 85°F |
| Connection | Replaces the faucet aerator. Adapters included for inside threads |
| Diverter | Lever switches between filtered and unfiltered water |
| Finish | White finish with a chrome diverter valve |
| Materials | BPA free |
| Replacement cartridge | Faucet Mount Filter Cartridge, 1.75 x 5 in |
| Made in | USA |

How to install it
It takes a few minutes and no tools.
- Unscrew the aerator from the end of your faucet.
- Check the threads. Outside threads need no adapter. For inside threads, choose the included adapter that fits, add its washer and screw it in by hand.
- Screw the diverter valve onto the faucet until snug, with the filter sitting to the left of the faucet.
- Turn the cold water on about one third of the way, then turn the diverter lever to filtered.
- Run water for 5 minutes to flush the new cartridge.
- From then on, let the water run for a second or two before each use.
Care and cartridge changes are covered in the Replacement Schedule tab. Prefer the chrome finish? See the 6-Stage Faucet Mount Water Filter in chrome.
| SKU | CQE-FM-00500 |
|---|---|
| On Sale | No |
When to replace it
Each cartridge filters about 2,000 gallons, which is 6 to 12 months for most households. How long yours lasts depends on your water quality and how much water you filter.
- Replace it sooner if the taste or odor of the water changes.
- Replace it sooner if the flow stays slow.
The replacement is the Faucet Mount Filter Cartridge.
How to replace it
- Unscrew the diverter valve from the faucet to take the filter off.
- Turn the upper housing counterclockwise to open it.
- Lift out the used cartridge, along with the hard white disk and the soft clear inner disk.
- Place the new cartridge in with the micron pad at the top and the disks back in position. Close the housing and screw the filter back onto the faucet.
- Run cold water for 5 to 10 minutes before first use.
Between changes
- Flip the cartridge about every three months. Move the micron pad to the other end, set the disks at the bottom, refit the filter and run water for 3 to 5 minutes. This back-flushes the media and helps it filter evenly.
- Wash the housing once a month with mild detergent and rinse it well.
- For hard-water build-up on the diverter valve, soak the valve in vinegar for 5 to 15 minutes.
- After a holiday or a long break, run water for 5 minutes before use.
- If the flow drops sharply, the micron pad or the cartridge is due for replacement.
Questions about timing? Contact us.
Faucet Mount Water Filter FAQ
Will the faucet mount water filter fit my faucet?
It fits most standard kitchen faucets with a removable aerator. Faucets with threads on the outside take the filter directly, and adapters with washers are included for faucets with threads on the inside. Pull-out and pull-down sprayer faucets are generally not suitable. If you are not sure about yours, contact us.
What does the faucet mount water filter reduce?
It is designed to reduce chlorine taste and odor, chloramines, VOCs, trihalomethanes (THMs), pesticides, heavy metals, hydrogen sulfide, sediment and rust. It is not designed for fluoride, nitrate, total dissolved solids or water hardness.
Does the faucet mount water filter reduce fluoride?
No. This filter is not designed to reduce fluoride. For fluoride, see our countertop fluoride filters or reverse osmosis systems.
How long does the cartridge last?
About 2,000 gallons, which is 6 to 12 months for most households. Replace it sooner if the taste or odor of the water changes or the flow stays slow. The replacement is the Faucet Mount Filter Cartridge.
Why is the filtered water flow slow?
It is slow by design. The filter delivers about 0.3 gallons per minute so the water has more contact time with the media. Open the cold tap about one third of the way for the best result.
Can I run hot water through the filter?
No. Filter cold water only, from 40 to 85°F. When you need hot water, turn the diverter lever to unfiltered first.
How do I install the faucet mount water filter?
Unscrew the aerator from your faucet, add an included adapter if your faucet has inside threads, and screw the filter on by hand. No tools or plumbing changes are needed. Then run cold water through it for 5 minutes to flush the new cartridge.
Can I switch between filtered and unfiltered water?
Yes. A lever on the diverter valve switches between the two. Use filtered water for drinking and cooking and unfiltered water for washing up, which helps the cartridge last longer.
What is the difference between the chrome and white models?
Only the finish of the filter housing. Both use the same six-stage cartridge and a chrome diverter valve, and they filter the same way. See the 6-Stage Faucet Mount Water Filter in chrome.
Can I use the faucet mount water filter on well water?
It is made for cold, municipally treated water or other water that is microbiologically safe. It does not disinfect water, so it is not suitable on its own for water of unknown quality.
