
2-7/8" x 9-3/4" Coconut Based 5-Micron Carbon Block Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the chlorine taste and odor it was filtering start coming back through, and your morning coffee notices before you do.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A solid block of coconut shell carbon that reduces chlorine taste and odor, VOCs and fine sediment for cleaner-tasting water.
- Reduces chlorine taste and odor
- Typical life: 12 to 24 months
- Measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing
Replacement cartridge, 2-7/8 x 9-3/4 in
Clean-tasting water from one solid block of coconut carbon
That swimming-pool note when you fill a glass is usually chlorine. This cartridge is a solid block of acid-washed coconut shell carbon that reduces chlorine taste and odor and strains fine sediment in the same pass, so your water, coffee and ice taste the way they should.
- Reduces chlorine taste and odor
- 5 micron solid carbon block
- Typical life: 12 to 24 months
- Fits a standard 2.5 x 10 in housing

What a fresh cartridge gives you
Better taste and smell
Reduces the chlorine taste and odor that city water carries to your tap.
Two jobs in one stage
The carbon adsorbs chemicals while the 5 micron block strains out fine particles.
Protection for what follows
As a pre-filter it keeps chlorine and grit away from the stages after it, including reverse osmosis membranes.
How it works
Coconut shell carbon
Acid-washed coconut shell activated carbon, with a very large surface area for adsorption.
One solid block
The carbon is formed into a single block with a low pressure drop, so flow stays strong.
5 micron rating
The block also works as a fine sediment filter.
What it reduces
Designed to reduce
- Chlorine taste and odor
- VOCs
- Sediment and fine particles down to 5 microns
- Some pesticides and herbicides
- Some disinfection byproducts, such as THMs
Not designed for
- Fluoride
- Nitrate
- Water hardness
- Total dissolved solids (TDS)
- Lead and other heavy metals
- Bacteria and viruses
A standard carbon block is less effective on chloramine than catalytic carbon. If your city uses chloramine, pair it with a SMART cartridge.

Find your size
Match the actual size printed on your current cartridge. This one measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing, the size used in our countertop, under sink and refrigerator systems.
| Cartridge size | Fits | Service flow |
|---|---|---|
| 2-7/8 x 9-3/4 in (this cartridge) | 2.5 x 10 in housing | 0.5 gpm |
| 2-7/8 x 20 in | 2.5 x 20 in housing | 2.5 gpm |
| 4-5/8 x 9-3/4 in | 10 in Big Blue housing | 3 gpm |
| 4-5/8 x 20 in | 20 in Big Blue housing | 6 gpm |

Specifications
| Part number | CQE-RC-04000 |
|---|---|
| Cartridge size | 2-7/8 x 9-3/4 in (actual) |
| Fits | Standard 2.5 x 10 in housing |
| Service flow | 0.5 gpm |
| Typical life | 12 to 24 months |
| Media | Acid-washed coconut shell activated carbon, solid block |
| Micron rating | 5 micron |
| Operating pressure | 30 to 60 psi |
| Water temperature | Cold water, 40°F minimum |
| Made in | USA |
How to replace it
A few minutes, with the wrench that came with your system.
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04000 |
|---|---|
| Country of Manufacture | United States |
| Dimensions | 2-7/8" x 9-3/4" |
| On Sale | No |
When to replace it
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
- Replace it sooner if the taste or odor of your water changes.
- Replace it sooner if the flow or pressure drops.
How to replace it
- Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath.
- Unscrew the housing with the housing wrench and lift out the used cartridge.
- Wash the housing with mild soap and water and rinse it well.
- Check that the O-ring is clean and fully seated in its groove.
- Unwrap the new cartridge and set it in, centered and fully seated. If one end is marked "This End Up, Toward Cap", that end faces the cap.
- Screw the housing back on by hand, then snug it with the wrench. Do not overtighten.
- Turn the water on slowly, check for leaks, then flush the new cartridge before first use.
Between changes
- As a reverse osmosis pre-filter on chlorinated city water, change it once a year to protect the membrane.
- Flush a new cartridge for 5 to 10 minutes to clear fine carbon particles.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Coconut Carbon Block Filter Cartridge FAQ
How is a carbon block different from a granular carbon cartridge?
A carbon block is one solid piece with a 5 micron rating, so it strains fine particles as well as adsorbing chemicals. Loose granular carbon adsorbs but does not strain.
Does a carbon block reduce chloramine?
Activated carbon can reduce chloramine, but a standard carbon block is less effective on it than catalytic carbon. For chloramine, choose a SMART cartridge.
Does it reduce fluoride, lead or hardness?
No. A carbon block is not designed for fluoride, nitrate, hardness or heavy metals. Those call for a dedicated stage.
Why is the first water gray after a change?
A new carbon block can release fine carbon particles at first. Run the water for 5 to 10 minutes before first use and it clears.
How often should I replace the carbon block cartridge?
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
Which size do I need?
Match the actual size printed on your current cartridge. This cartridge measures 2-7/8 x 9-3/4 in and fits a standard 2.5 x 10 in housing. Housings are often named by nominal size, which is slightly larger than the cartridge itself.
How do I replace it?
Turn off the water supply to the filter and release the pressure as your system manual directs. Place a towel or drip pan underneath. Unscrew the housing with the housing wrench and lift out the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
