
UV Lamp 6 GPM
In stock
A replacement germicidal lamp for our UV water sterilizers, rated for about 9,000 hours, or one year of use.
- Restores full UV output
- Typical life: 12 months
- For our UV water sterilizers
Replacement lamp
Keep your UV sterilizer at full strength
A UV lamp keeps glowing long after its germicidal output has faded, so the eye cannot tell when it is due. A fresh lamp once a year keeps your sterilizer working at the strength it was designed for.
- Restores full UV output
- About 9,000 hours of lamp life
- Typical life: 12 months
- For our UV water sterilizers
What a fresh cartridge gives you
Full germicidal output
A new lamp brings the UV dose back to its designed level.
Peace of mind
Your sterilizer keeps doing its job on bacteria and viruses.
Nothing added to the water
UV treats water with light. It adds no chemicals and changes no taste.
How it works
Germicidal UV light
The lamp produces UV-C light inside the sterilizer chamber.
Inactivation
UV light disrupts bacteria and viruses as water flows past, so they cannot multiply.
Output fades with hours
After about 9,000 hours the lamp still lights but its output is lower.
What a UV sterilizer does
Designed for
- Bacteria
- Viruses
- Cysts
Not designed for
- Sediment
- Chlorine and chemicals
- Heavy metals
- Fluoride and nitrate
UV works on clear water. Keep a sediment filter ahead of the sterilizer so particles do not shade the light.
Where it fits
Choose the lamp that matches the flow rating of your UV water sterilizer. If you are not sure which lamp or connector your system takes, contact us before you order.
Specifications
| Part number | CQE-UV-03102 |
|---|---|
| Typical life | 12 months |
| Lamp life | About 9,000 hours (one year of continuous use) |
How to replace it
A few minutes. Your system manual has the details for your model.
- Unplug the UV sterilizer and let the lamp cool for a few minutes.
- Take off the end cap and unplug the lamp connector.
- Slide the used lamp out, holding it by the ends.
- Slide the new lamp in without touching the glass. Use a clean cloth or gloves.
- Reconnect the lamp, refit the end cap and plug the sterilizer back in.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-UV-03102 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Once a year. The lamp is rated for about 9,000 hours, which is one year of continuous use. It will still light after that, but its germicidal output is lower.
- Replace it once a year, even if it still lights.
- Replace it at once if the lamp or the indicator goes out.
How to replace it
- Unplug the UV sterilizer and let the lamp cool for a few minutes.
- Take off the end cap and unplug the lamp connector.
- Slide the used lamp out, holding it by the ends.
- Slide the new lamp in without touching the glass. Use a clean cloth or gloves.
- Reconnect the lamp, refit the end cap and plug the sterilizer back in.
Between changes
- Clean the quartz sleeve at each lamp change.
- Keep a sediment filter ahead of the sterilizer so the water stays clear.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Questions about timing? Contact us.
UV Replacement Lamp, 6 GPM FAQ
Why replace a UV lamp that still lights up?
The visible glow is not the germicidal output. After about 9,000 hours the UV-C output has faded even though the lamp still lights.
Can I touch the lamp?
Hold it by the ends. Oils from your skin on the glass can shorten its life, so use a clean cloth or gloves.
Should I clean the quartz sleeve?
Yes. A lamp change is a good time to clean the quartz sleeve, so mineral film does not block the light.
How often should I replace the UV lamp?
Once a year. The lamp is rated for about 9,000 hours, which is one year of continuous use. It will still light after that, but its germicidal output is lower.
How do I replace it?
Unplug the UV sterilizer and let the lamp cool for a few minutes. Take off the end cap and unplug the lamp connector. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
