
Bath Ball Replacement filter
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12-18 months. After that, the chlorine and contaminants it was filtering start coming back through, and your skin notices before you do.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
The replacement filter disk for the Bath Ball. Reduces chlorine, chloramine and hydrogen sulfide in hot bath water.
- Reduces chlorine in hot bath water
- Typical life: 12 to 18 months
- Fits the Bath Ball filter
- Buy 2 for $38.24 each and save 3%
- Buy 4 for $37.99 each and save 4%
- Buy 6 for $37.65 each and save 5%
Replacement filter
A softer, fresher bath, every time you fill the tub
A hot bath opens your pores and fills the room with steam, which is when chlorine is most noticeable. This replacement disk puts fresh redox media back into your Bath Ball, reducing chlorine and that swimming-pool smell as the tub fills.
- Reduces chlorine in hot bath water
- Made for hot water
- Typical life: 12 to 18 months
- Fits the Bath Ball filter

What a fresh cartridge gives you
Kinder to skin and hair
Less chlorine in the bath leaves skin and hair feeling softer.
Fresher air
Reduces the swimming-pool smell that rises with the steam.
Made for hot water
The redox media keeps working at bath temperatures.
How it works
Copper-zinc redox media
Reduces chlorine through a chemical reaction, so heat does not slow it down.
Mesh screens
Hold back dirt and sediment as the tub fills.
Reversible disk
Flip it from time to time to keep filtration even.
What it reduces
Designed to reduce
- Chlorine
- Chloramine
- Hydrogen sulfide (rotten-egg odor)
- Iron and rust-colored water
- Heavy metals
- Dirt and sediment
Not designed for
- Water hardness (it is not a softener)
- Fluoride
- Nitrate
- Total dissolved solids (TDS)
- Bacteria and viruses
For the shower as well, see our shower filters.

Where it fits
This disk fits the Bath Ball Filter in every color.

Specifications
| Part number | CQE-RC-04052 |
|---|---|
| Typical life | 12 to 18 months |
| Media | Copper-zinc redox media |
| Format | Reversible filter disk |
| Operating pressure | 30 to 60 psi |
| Made in | USA |
How to replace it
A minute or two, with no tools.
- Pull the used filter disk up firmly to take it out of the Bath Ball.
- Push the new disk down firmly until it seats.
- Hang the Bath Ball on the tub spout and run hot water through it for 2 to 5 minutes to flush loose media fines.
- Let the tub drain, then fill your bath as usual.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04052 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
Customer Reviews
When to replace it
Typically every 12 to 18 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
- Replace it sooner if the taste or odor of your water changes.
- Replace it sooner if the flow or pressure drops.
How to replace it
- Pull the used filter disk up firmly to take it out of the Bath Ball.
- Push the new disk down firmly until it seats.
- Hang the Bath Ball on the tub spout and run hot water through it for 2 to 5 minutes to flush loose media fines.
- Let the tub drain, then fill your bath as usual.
Between changes
- Flip the disk from time to time to keep filtration even.
- Let the Bath Ball drain and dry between baths.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Bath Ball Replacement Filter FAQ
How often should I flip the filter disk?
Flip it from time to time. Reversing the disk balances the filtration and helps it last its full life.
Does the Bath Ball filter work in hot water?
Yes. The redox media is made for hot water and reduces chlorine through a chemical reaction.
Does it soften bath water?
No. It is not a water softener and does not reduce hardness minerals.
How often should I replace the Bath Ball filter?
Typically every 12 to 18 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
How do I replace it?
Pull the used filter disk up firmly to take it out of the Bath Ball. Push the new disk down firmly until it seats. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
