
Bath Ball Filter
In stock
The bath ball Filter is the most advanced bath filter on the market. Removes chlorine, chloramines, VOC's, THM's, pesticides, sulfur, heavy metals. It hangs off your tap to give you the purest bath possible.

Bath water filter
A softer bath, starting at the spout.
The Bath Ball Filter hangs on your tub spout and reduces chlorine, chloramines and more as the bath fills. There is nothing to plumb, and it lifts off when the bath is run.
- Hangs on the tub spout
- No tools, no plumbing
- 5 colors
- 12 to 18 months per cartridge
Why filter your bath
Softer skin and hair, from the water you soak in.
City water carries chlorine or chloramine to keep it safe on its way to your home. By the time it fills your tub that job is done, yet it is still in the warm water you soak in. The Bath Ball Filter takes the water through three kinds of filter media as the tub fills: carbon, redox alloy and ceramic spheres.
The result is smoother, softer skin and hair that is less dry, without the swimming pool smell rising from a hot bath. It is an easy upgrade for the whole family, with nothing about your routine to change.
- Softer skin and hairSmoother, softer skin and hair that is less dry.
- No chlorine smellThe swimming pool smell fades from a hot bath.
- Nothing to plumbThe loop goes over the spout. No tools, and easy to take with you when you move.
- BPA-free, made in the USAA reusable housing with a replaceable cartridge that keeps waste down.

- 3Kinds of filter media
- 12–18moPer cartridge
- 2,500galOf bath water per cartridge, up to
- 5Colors
Inside the filter
One cartridge, three kinds of media.
Water falls into the open top of the ball, through a stainless steel mesh, across a deep bed of media spheres and out of the base into the tub. Because the ball holds a full bed of media, the water spends more time in contact with it.
- 01Catalytic and coconut carbonCarbon spheres with a vast inner surface. They help break down chloramines and hold odors and organic compounds such as VOCs.

- 02ERA redox alloyERA-6500 and ERA-9500 are copper-zinc alloys that work by reaction, which suits the warm water of a bath. They neutralize chlorine and reduce hydrogen sulfide and some dissolved metals, such as lead.

- 03Ceramic spheresWhite ceramic spheres help balance the pH of the water, help clarify it and neutralize chlorine as the water passes.

The cartridgeReversible, with a stainless steel mesh face
All the media sits in one disk-shaped cartridge. A stainless steel mesh across its face holds the spheres in place and catches loose grit on its way to the tub. The cartridge works in either direction. Turning it over from time to time balances the flow across the media and helps it last.
What it reduces
What it takes out of your bath.
Chlorine and chloramines first, along with other substances that affect how a bath feels and smells.
- ChlorineRedox alloy, ceramic and carbon
- ChloraminesCatalytic carbon
- Hydrogen sulfideRedox alloy, the rotten egg odor
- OdorsCarbon, for a fresher bath
- VOCsCarbon, some organic compounds
- Pharmaceutical tracesCarbon
- Lead and dissolved metalsRedox alloy, some reduction
- SedimentStainless steel mesh, loose grit

Between baths
Lift off, drain and dry.
The Bath Ball Filter lifts off the spout when the bath is run. Let it drain and leave it to air dry in the open, and it is ready for the next bath.

Design details
Simple by design.
- Reusable housingA BPA-free ABS ball that unscrews into two halves.
- One cartridgeSet it in the housing and screw the halves together. No tools.
- Two handles in the boxA hard handle and a flex handle, to suit your spout.
- Light and compactAbout 2 lbs, easy to lift off and put away.
How it hangs
Three steps, no tools.
Most tub spouts take it just as it is. The loop goes over the spout and the ball hangs right under the outlet.
- 01Fit the handleSnap the hard or flex handle into the two holes on top of the ball.

- 02Hang it on the spoutHang the loop over the spout so the ball sits right under the outlet. On a spout with a pull-up diverter knob, the loop sits behind the knob, which keeps it in place.

- 03Run the bathFill the tub as usual. Water goes in at the top of the ball and out of the base.

Five colors, one filter
Choose the one that suits your bathroom.
Every color is the same Bath Ball Filter with the same cartridge inside. Pick yours in the options at the top of the page.
- WhiteThe original, at home in any bathroom.
- ChromeA polished look that matches chrome fixtures.
- BlackClean and modern.
- Pink and BlueSoft colors that also make a thoughtful gift.

See it in action
A closer look.
Optional add-on
Add extra replacement filters.
Order one, two or three replacement filters with your Bath Ball Filter from the options at the top of the page, so the next change is already on hand.
Specifications
The details.
- Model
- CQE-SP-00880
- Type
- Bath filter that hangs on the tub spout
- Filter media
- Catalytic and coconut carbon, ERA redox alloy, ceramic spheres
- Cartridge
- Reversible, lasts 12 to 18 months
- Capacity
- About 2,000 to 2,500 gallons of bath water
- Flow rate
- Works best at 2 to 3 gallons per minute. Handles a tub fill of up to 5 gallons per minute
- Water temperature
- 40 to 110°F
- Housing
- BPA-free ABS plastic
- Colors
- White, Chrome, Black, Pink, Blue
- Weight
- 2 lbs
- Made in
- United States
- Replacement cartridge
- CQE-RC-04052 Bath Ball replacement filter
What to expect
From box to first bath.
- AssembleSnap in a handle, set the cartridge in the housing and screw the two halves together.
- RinseRun hot water through a new cartridge for 2 to 5 minutes to clear loose carbon fines.
- FillHang it on the spout and fill the tub as usual, so all the water runs through the ball.
- Drain and dryLift it off after the bath, let it drain and leave it to air dry in the open.
Full installation and care instructions are in the manual.
Download the manual (PDF)Ongoing care
A fresh cartridge every 12 to 18 months.
Daily baths and hard water use a cartridge up sooner. Replace it earlier if the flow through the ball slows or the chlorine smell comes back. Add extra filters when you order, or reorder the Bath Ball replacement filter when it is due. Questions? Contact us and we will help.
| SKU | CQE-SP-00880 |
|---|---|
| On Sale | No |
Customer Reviews
It has been a long time since I used my favorite bath Filter...I would love to win a bath Filter!
I simply love them.
I had two.,.one for the shower and one for the tub.
Thanks a lot,
Former customer
Patti Crist
I wish that there was a recycling/exchange program available for the used filters.
A waste of money-over $100 as I ordered a replacement filter as well.
-
Chlorine and chloramines first. It also reduces low levels of hydrogen sulfide (the rotten egg odor), other odors, some VOCs, pharmaceutical traces, some lead and other dissolved metals, and loose grit. The ceramic media also helps balance the pH of the water.
-
One Bath Ball Filter housing in your choice of White, Chrome, Black, Pink or Blue, one cartridge, a hard handle and a flex handle. Every color uses the same cartridge.
-
It hangs by its loop handle over most tub spouts, with the ball sitting right under the outlet. On a spout with a pull-up diverter knob, the loop sits behind the knob, which keeps it in place. It needs a spout to hang on, so a tub filler with nowhere for the loop may not suit it. If you are unsure, send us a photo of your spout and we will help.
-
There is nothing to plumb. Snap a handle into the two holes on top of the ball, set the cartridge in the housing, screw the two halves together and hang the loop over the spout. Rinse a new cartridge with hot water for 2 to 5 minutes before the first bath.
-
About 2,000 to 2,500 gallons of bath water, which is typically 12 to 18 months. Daily baths and hard water use a cartridge up sooner. Replace it earlier if the flow through the ball slows or the chlorine smell comes back. Reorder the Bath Ball replacement filter when it is due.
-
Not much. It works best at 2 to 3 gallons per minute and handles a tub fill of up to 5 gallons per minute. If your spout runs faster and water spills over the top of the ball, ease the tap back a little so all of it passes through the filter.
-
Yes. In the manufacturer’s testing, run following the NSF/ANSI 177 method with 104°F water, a new cartridge reduced 99 to 100 percent of chlorine through the first 132 gallons and stayed above 50 percent through about 1,320 gallons.
-
No. It does not reduce the minerals that make water hard, so it is not a water softener. What it does reduce is chlorine, which is why skin feels less dry and hair feels softer after a bath.
-
No. The Bath Ball Filter is made for chlorine and chloramines in bath water. For fluoride in the water you drink, see our fluoride water filters.
-
Yes. It hangs up on the spout, out of the way, and reduces chlorine while the tub fills. As with any bath, check the water temperature first and stay with young children in the tub.
-
Lift it off the spout after each bath, let the water drain out and leave it to air dry somewhere open. Do not store it damp in a closed cabinet. Turn the cartridge over from time to time to keep the flow balanced. If you see spots or a film on the housing, clean it with mild dish detergent or hydrogen peroxide, then rinse it well.
-
No. It is made to hang on a tub spout. For the shower, see our Luxury Shower Filter or the Handheld Luxury Shower Filter.
