
Refrigerator/In-line Fluoride Removal + SMART Filter
In stock
The Refrigerator/In-line Fluoride Removal + SMART (Previously: Multi PLUS) Water Filter is designed for use on refrigerators with ice-makers and/or water through the door. It may be used with fountains, water coolers, coffee makers and ice machines. It can be used on either 1/4" o.d. copper or plastic tubing.
This system effectively removes FLUORIDE, chlorine, heavy metals and hundreds of contaminants. It installs on the cold water line before it enters the fridge. Making it compatible with all refrigerators.

Seven-stage in-line fluoride filter
Fluoride-filtered water and ice, right from the door.
The Refrigerator/In-line Fluoride + SMART Filter installs on the cold water line before it reaches your refrigerator. Seven stages of filtration, including a dedicated bone char stage for fluoride, treat every glass of water and every batch of ice.
- 7 stages of filtration
- Bone char fluoride stage
- Works with any refrigerator
- About 9 months per cartridge
Why an in-line filter
The filter inside your refrigerator was not designed for fluoride.
A standard refrigerator filter handles chlorine and some other contaminants, but not fluoride. This system installs on the water line before the refrigerator, so fluoride is filtered ahead of the dispenser and the ice maker, whatever brand or model you own.
Alongside fluoride it reduces chlorine, chloramines, heavy metals, sediment and hundreds of other contaminants that affect taste and odor. Clean-tasting water at the door makes it easy for the whole household to drink more of it, and that is one of the simplest things you can do for your health.
- Filters before the refrigeratorIt installs on the cold water line, which makes it compatible with all refrigerators.
- Water and ice from one filterTreats the door dispenser and the ice maker together.
- Works with your existing refrigerator filterKeep the built-in filter in place, or rely on this system alone.
- About nine months per cartridgeChanging it takes a few minutes and does not need a plumber.

- 7Stages of filtration
- 9moPer cartridge
- 1micronPre and post filter pads
- ¼inQuick-connect fittings
Inside the cartridge
Seven stages on a single water line.
Water travels through seven stages of filtration before it reaches your glass. Each one has a specific job.
Stages one and sevenOne-micron filter pads
Pre and post filter pads rated at one micron, about 1/25,000th of an inch, reduce suspended particles such as silt, sediment, sand, rust, dirt and other undissolved matter, along with cysts such as Giardia and Cryptosporidium.
Stage two, the fluoride stageBone char fluoride media
Water flows through a dedicated fluoride cartridge of bone char, a natural carbon with a high affinity for fluoride that also reduces lead. The media has a uniform particle size, is physically stable and works across a wide pH range. It has produced effluent levels below 0.2 ppm from a 10 ppm fluoride feed.
Stages three and fiveEagle Redox Alloy media
Two beds of a high-purity alloy of copper and zinc, ERA-6500 and ERA-9500, work on the electrochemical oxidation-reduction principle. Chlorine is oxidized almost instantly, and the media is very slow to exhaust.
Stage fourIon exchange resin, ceramic and tourmaline
Ion exchange resins reduce heavy metals such as lead, copper and aluminum, and reduce water hardness. Ceramic and tourmaline balls enhance the water and help maintain a more alkaline pH.
Stage sixCoconut shell and catalytic carbon
A blend of coconut shell and catalytic granulated activated carbon adsorbs a wide range of organic contaminants: chlorine (99.9%), chloramines, THMs, benzene, pesticides, herbicides, insecticides, VOCs, PCBs, MTBE and hundreds of other chemicals that cause bad tastes and odors.
What it reduces
Far more than fluoride.
Seven stages working together address fluoride, chlorine, metals, sediment and chemicals in a single pass.
- FluorideBone char fluoride stage
- Chlorine99.9% with activated carbon
- ChloraminesCatalytic carbon
- PFASActivated carbon
- LeadBone char and ion exchange resin
- Copper and aluminumIon exchange resin
- Sediment and rustOne-micron filter pads
- CystsGiardia and Cryptosporidium
- VOCsIncluding benzene and THMs
- Pesticides and herbicidesAlong with insecticides
- PCBs and MTBEActivated carbon
- Tastes and odorsFor cleaner water and ice

Installation
Installed once, then out of sight.
It connects to the cold water line behind the refrigerator, in a nearby cupboard or in the basement below. We recommend a licensed plumber for the first installation, which is a simple job. After that, changing the cartridge does not require one.

Design details
Built to fit the line you already have.
- Quick-connect fittingsHigh-pressure fittings for 1/4 in o.d. copper or plastic tubing.
- 3/8 in linesCan be manufactured for 3/8 in tubing with a conversion package. Contact us before ordering.
- Compact housing5 in L x 5 in W x 14 in H, which includes 4 in of clearance to change the cartridge.
- Made in the United StatesBuilt to work at 20 to 60 psi with cold water from 40 to 90°F.
Beyond the refrigerator
One filter for any cold water line.
The same system can be used wherever a 1/4 in line feeds a drink or ice appliance.
- RefrigeratorsIce makers and water through the door
- Water fountainsHome or office
- Water coolersPlumbed-in models
- Coffee makersIncluding commercial machines
- Ice machinesCleaner-tasting ice
Optional add-on
Add a leak detector for peace of mind.
The Leak Detector Smart Valve is a flood-prevention valve that we recommend with any in-line installation. Add it from the options at the top of the page when you order.
Specifications
The details.
- Model
- CQE-RF-00705
- Filtration
- 7 stages
- Fluoride media
- Bone char
- Fluoride capacity
- 4,500 ppm, an average of 1,000 to 1,500 gallons
- Cartridge life
- About 9 months
- Flow rate
- 0.3 to 0.5 gallons per minute
- Operating pressure
- 20 to 60 psi
- Water temperature
- 40 to 90°F
- Connections
- 1/4 in quick-connect, copper or plastic tubing
- Dimensions
- 5 in L x 5 in W x 14 in H
- Weight
- 5 lbs
- Made in
- United States
- Replacement cartridge
- CQE-RC-04152 SMART + bone char fluoride cartridge
What to expect
From install to first glass.
- Choose the spotBehind the refrigerator, in a nearby cupboard or in the basement, anywhere along the cold water line.
- ConnectYour plumber connects the filter to the line with the quick-connect fittings.
- FlushFlush the new cartridge before first use, following the manual.
- ReplaceChange the cartridge about every nine months, or sooner if the flow slows or off-tastes return.
Installs on the cold water line only.
Ongoing care
Keep the water and ice tasting their best.
Replace the cartridge about every nine months. This system is designed for municipal water. On well water, or if you have questions about your water line, contact us and we will help you choose.
| SKU | CQE-RF-00705 |
|---|---|
| Country of Manufacture | United States |
| Dimensions | 5"L x 14"H (10"+4" to change cartridge) x 5"W |
| On Sale | No |
Customer Reviews
-
The standard water filter inside your fridge does not filter fluoride. It will filter chlorine, heavy metals, and other contaminants, but not fluoride. We offer refrigerator fluoride filters that work with your existing fridge filter. They install inline, along the cold-water line that goes to your refrigerator allowing you to have fluoride-free ice and water. Installation can be behind your fridge, anywhere along that water line, inside a cupboard, or in the basement below the fridge.
-
There are two types of refrigerator fluoride filters:
If you are happy with the contaminants your existing fridge filter removes and just want to filter fluoride. The Fluoride Only water filter system is your best option. It uses Bone-Char to filter fluoride.
If you don’t have an existing fridge filter or you are not happy with the taste and would like to filter more contaminants, the Fluoride Multi Plus is the best choice. It uses Bone-Char combined with our smart media to filter a wide range of contaminants including chlorine, PFAs, heavy metals and pesticides.
-
Refrigerator/in-line fluoride filters are installed on the cold water line feeding your refrigerator, ice maker, or dispenser. Instead of relying on a small cartridge inside the refrigerator, the water is filtered before it ever enters the fridge. This makes the system compatible with virtually any brand or model of refrigerator that uses a standard 1/4" water line.
Inside the system, water passes through dedicated fluoride reduction media and additional filtration stages (on the Multi PLUS model) that target chlorine, chloramines, heavy metals, sediment, and many other contaminants. The result is cleaner, better-tasting water and ice directly from your refrigerator.
-
A properly sized and installed refrigerator/in-line filter should not significantly reduce your water pressure or ice production. These systems are designed for standard household refrigerator and ice maker flows, and most customers notice only that the water and ice taste better and smell cleaner.
If you do experience a noticeable slowdown in flow or smaller ice cubes over time, it usually indicates that the filter has captured a lot of sediment and contaminants and is ready to be replaced. Checking for kinks or tight bends in the tubing and following the recommended replacement schedule will help keep your fridge water and ice running smoothly.
-
The Fluoride Only system should be replaced yearly.
The Fluoride Multi Plus system should be replaced every 9 months
We always recommend checking the “Replacement Schedule tab” on the product page for the specific system you own. There you’ll see the exact part number, expected lifespan and a clear schedule to follow. If you notice a drop-in flow rate or a return of off-tastes or odors sooner than expected, it is usually a sign that the cartridge is due for replacement.
-
Installation should be done by a licensed, local plumber. It is a very simple job for a plumber. It can be installed behind the fridge. If there is not space it can be installed anywhere along the cold-water line that goes to the fridge. This can be in a near by cupboard or even in the basement. Cartridge replacement does not require a plumber.
-
If you have an under sink filtration system you can split the product water line and run that to your refrigerator. This will work as long as there is a practical way to run that water line from under the sink to the fridge. If that is not an option, a separate refrigerator filter is needed.
