Water Cooler Sediment Filter Cartridge

SKU : CQE-RC-04037

In stock

Subscription details

Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the sand, silt and rust it was catching start getting through, and the cartridges behind it clog sooner.

Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.

A sealed inline sediment cartridge that catches dirt, sand, silt and rust ahead of the carbon and membrane stages.

  • Catches dirt, sand, silt and rust
  • Typical life: 12 to 24 months
  • For water coolers and RO systems

Replacement cartridge

Stop the grit before it reaches the finer stages

Dirt, sand and rust particles wear out carbon and membrane stages early. This sealed inline cartridge catches them first, on the water line that feeds your cooler or reverse osmosis system.

  • Catches dirt, sand, silt and rust
  • Sealed inline cartridge
  • Typical life: 12 to 24 months
  • For water coolers and RO systems
Inline Sediment Filter Cartridge, white inline cartridge with JACO elbow fittings and red caps, upright view

What a fresh cartridge gives you

Clearer water

Reduces the sand, silt, dirt and rust particles that cloud water and settle in fixtures.

Longer life for other stages

Keeps sediment off the carbon, SMART and membrane stages that follow.

Strong, steady flow

Pleats multiply the surface area, so the cartridge holds more dirt before flow drops.

0.5GPM service flow
12-24Months, typical life
5%Off with Subscribe and save
USAMade in

How it works

1

Mechanical filtration

Water passes through filter media that holds back suspended particles.

2

First in line

Placed ahead of the carbon and membrane stages to protect them.

3

Sealed design

The whole cartridge is replaced, with no housing to open or clean.

What it reduces

Designed to reduce

  • Extra-fine dirt, sand and silt
  • Rust particles
  • Loose scale particles
  • Asbestos fibers
  • Cloudiness from suspended particles

Not designed for

  • Chlorine and chemicals
  • Dissolved metals such as iron and lead
  • Fluoride and nitrate
  • Water hardness
  • Bacteria and viruses

It filters suspended particles only. Anything dissolved in the water passes through and is handled by the stages after it.

Inline Sediment Filter Cartridge, close-up of the elbow fitting with red cap and embossed end cap

Where it fits

This is the sediment stage for our bottleless water coolers and under sink reverse osmosis systems. It is plumbed on the water line and replaced as one piece.

Inline Sediment Filter Cartridge, white inline cartridge lying horizontally with label and elbow fittings

Specifications

Part numberCQE-RC-04037
Typical life12 to 24 months
FormatSealed inline cartridge with a connector at each end
Operating pressure20 to 60 psi
Water temperatureCold water, 40 to 90°F
Made inUSA

How to replace it

A few minutes. There is no housing to open.

  1. Shut off the water supply to the filter line and place a towel underneath.
  2. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
  3. Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
  4. On threaded connections, wrap the threads with thread seal tape before connecting.
  5. Turn the water on slowly and check each connection for leaks.
  6. Flush the new cartridge before first use.

Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.

SKU CQE-RC-04037
Country of Manufacture United States
On Sale No
Write Your Own Review
You're reviewing: Water Cooler Sediment Filter Cartridge
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

When to replace it

Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.

  • Replace it sooner if the flow or pressure drops.
  • Replace it sooner if the pleats look heavily loaded with dirt.

How to replace it

  1. Shut off the water supply to the filter line and place a towel underneath.
  2. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
  3. Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
  4. On threaded connections, wrap the threads with thread seal tape before connecting.
  5. Turn the water on slowly and check each connection for leaks.
  6. Flush the new cartridge before first use.

Between changes

  • Keep a spare on the shelf. Sediment loads can jump after plumbing work, a water main break or heavy rain on a well.
  • Change it together with the stages after it, so a fresh sediment cartridge protects fresh media.
  • Write the install date on the cartridge label or in your calendar so the next change is easy to time.

Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.

Questions about timing? Contact us.

Inline Sediment Filter Cartridge FAQ

Why choose a pleated sediment filter?

The pleats give the media a large surface area, which raises its dirt-holding capacity and keeps flow strong for longer.

Does a sediment filter treat dissolved contaminants?

No. It filters suspended particles only. Chlorine, dissolved metals, nitrate and fluoride need a carbon, SMART or specialty stage.

Why did my sediment filter clog early?

Your water is carrying more sediment than usual. That is common on well water, after plumbing work or after a water main break. Replace the cartridge and check it more often.

How often should I replace the sediment cartridge?

Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.

How do I replace it?

Shut off the water supply to the filter line and place a towel underneath. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.

Can I have replacements delivered automatically?

Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.

Recommended Products

Sharp Reverse Osmosis Water Cooler
$964.00
Sale
Haven 800 GPD Tankless Under-Sink RO System, front view with the cover closed
Special Price $749.00 Regular Price $949.00
50 GPD Countertop Reverse Osmosis System
$202.23
Black Fluoride Pitcher Filter
$42.95

Related Products

Inline GAC Carbon Filter Cartridge, white inline cartridge with elbow fittings and red caps, upright view
$49.00
SMART/Fluoride Removal Water Pitcher Cartridge
SMART Inline Multi Stage Filter Cartridge, white inline cartridge with elbow fittings and red caps, upright view
$69.00
50 GPD Reverse Osmosis Membrane, blue membrane element with white label, black brine seal and white center tube, angled view
$49.17