SMART Inline Filter Cartridge

SKU : CQE-RC-04040

In stock

Subscription details

Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the chlorine and metals it was filtering start coming back through, and you taste it in every glass.

Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.

A sealed inline SMART cartridge with carbon, catalytic carbon, redox media and ion exchange resin for water coolers and reverse osmosis systems.

  • Reduces chlorine, chloramine and heavy metals
  • Typical life: 12 to 24 months
  • For water coolers and RO systems

Replacement cartridge

One cartridge, many layers of filtration

City water picks up chlorine or chloramine at the treatment plant and can gather metals from the pipes on its way to you. The SMART cartridge layers several filter media in one housing to reduce them together, for water that tastes clean and is a pleasure to drink.

  • Reduces chlorine, chloramine and heavy metals
  • Sealed inline cartridge
  • Typical life: 12 to 24 months
  • For water coolers and RO systems
SMART Inline Multi Stage Filter Cartridge, white inline cartridge with elbow fittings and red caps, upright view

What a fresh cartridge gives you

Fresh taste, no chemical edge

Reduces chlorine and chloramine and the taste and odor they cause.

Broad filtration

Also reduces heavy metals, VOCs, THMs, pesticides and herbicides.

Simple to change

A sealed cartridge with a connector at each end, replaced as one piece.

6Filter media in one cartridge
12-24Months, typical life
5%Off with Subscribe and save
USAMade in

How it works

1

Coconut and catalytic carbon

Adsorb chlorine, break down chloramine and take up organic chemicals.

2

Copper-zinc redox media

Two alloys: one for chlorine, one for ferrous iron and hydrogen sulfide.

3

Ion exchange resin

A potable-grade resin that is selective for heavy metals.

4

Ceramic, tourmaline and a 1 micron pad

Condition the water and catch fine particles at the base.

What it reduces

Designed to reduce

  • Chlorine and chloramine
  • Heavy metals, including lead and mercury
  • VOCs and THMs
  • Pesticides and herbicides
  • Pharmaceutical residues
  • Ferrous iron and hydrogen sulfide at low levels

Not designed for

  • Fluoride
  • Nitrate
  • Arsenic
  • Water hardness
  • Total dissolved solids (TDS)
  • Bacteria and viruses

For fluoride as well, see the SMART + Calcium GAC fluoride cartridge.

SMART Inline Multi Stage Filter Cartridge, close-up of the elbow fitting with red cap and embossed end cap

Where it fits

This is the SMART stage for our bottleless water coolers and under sink reverse osmosis systems. It is plumbed on the water line and replaced as one piece.

SMART Inline Multi Stage Filter Cartridge, white inline cartridge lying horizontally with label and elbow fittings

Specifications

Part numberCQE-RC-04040
Typical life12 to 24 months
MediaCoconut shell carbon, catalytic carbon, copper-zinc redox alloys, ion exchange resin, ceramic media
FormatSealed inline cartridge with a connector at each end
Operating pressure20 to 60 psi
Water temperatureCold water, 40 to 90°F
Made inUSA

How to replace it

A few minutes. There is no housing to open.

  1. Shut off the water supply to the filter line and place a towel underneath.
  2. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
  3. Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
  4. On threaded connections, wrap the threads with thread seal tape before connecting.
  5. Turn the water on slowly and check each connection for leaks.
  6. Flush the new cartridge before first use.

Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.

SKU CQE-RC-04040
Country of Manufacture United States
On Sale No
Write Your Own Review
You're reviewing: SMART Inline Filter Cartridge
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

When to replace it

Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.

  • Replace it sooner if the taste or odor of your water changes.
  • Replace it sooner if the flow or pressure drops.

How to replace it

  1. Shut off the water supply to the filter line and place a towel underneath.
  2. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
  3. Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
  4. On threaded connections, wrap the threads with thread seal tape before connecting.
  5. Turn the water on slowly and check each connection for leaks.
  6. Flush the new cartridge before first use.

Between changes

  • Flush a new cartridge for about 15 minutes before use. A little carbon dust in the first water is normal.
  • Fit it with the arrow on the label pointing the way the water travels.
  • Write the install date on the cartridge label or in your calendar so the next change is easy to time.

Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.

Questions about timing? Contact us.

SMART Inline Multi Stage Filter Cartridge FAQ

Does the SMART cartridge reduce chloramine?

Yes, it is designed to. It pairs coconut carbon with catalytic carbon, which breaks chloramine down.

Does it reduce dissolved solids or fluoride?

No. In a reverse osmosis system that is the job of the membrane. For fluoride on a cooler or filter line, see the inline fluoride cartridge.

Is carbon dust in the first water normal?

Yes. A little fine carbon dust in the first gallons is normal and clears with the flush.

How often should I replace the SMART cartridge?

Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.

How do I replace it?

Shut off the water supply to the filter line and place a towel underneath. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.

Can I have replacements delivered automatically?

Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.

Recommended Products

Sharp Reverse Osmosis Water Cooler
$964.00
Sale
Haven 800 GPD Tankless Under-Sink RO System, front view with the cover closed
Special Price $749.00 Regular Price $949.00
50 GPD Countertop Reverse Osmosis System
$202.23
Black Fluoride Pitcher Filter
$42.95

Related Products

Inline Sediment Filter Cartridge, white inline cartridge with JACO elbow fittings and red caps, upright view
$49.00
Inline GAC Carbon Filter Cartridge, white inline cartridge with elbow fittings and red caps, upright view
$49.00
SMART/Fluoride Removal Water Pitcher Cartridge
50 GPD Reverse Osmosis Membrane, blue membrane element with white label, black brine seal and white center tube, angled view
$49.17