
Reverse Osmosis Membrane TFC Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 2 to 3 years. After that, the dissolved solids it was holding back start getting through, and the clean taste of your RO water fades.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A 50 gallon per day thin-film reverse osmosis membrane that reduces up to 99% of total dissolved solids.
- Reduces up to 99% of dissolved solids
- Typical life: 2 to 3 years
- Fits a 2 x 12 in membrane housing
Replacement membrane
The heart of your reverse osmosis system, renewed
The membrane is the stage that does the real work in reverse osmosis. It holds back dissolved solids that carbon filters cannot touch, which is what gives RO water its clean, light taste. A fresh membrane brings that performance back.
- Reduces up to 99% of dissolved solids
- 50 gallons per day
- Typical life: 2 to 3 years
- Fits a 2 x 12 in membrane housing

What a fresh cartridge gives you
Clean, light taste
Brings your purified water back to low dissolved solids.
Dissolved solids reduction
Reduces lead, fluoride, nitrates, sodium and other dissolved solids.
Years of service
Typically 2 to 3 years when the pre-filters are changed on time.
How it works
Thin-film membrane
A tightly wound thin-film composite membrane.
Pressure does the work
Water is pushed through the membrane while dissolved solids are carried to the drain.
Part of a system
Carbon stages ahead of it take out chlorine, which protects the membrane.
What it reduces
Designed to reduce
- Total dissolved solids (TDS), up to 99%
- Lead, mercury, cadmium and trivalent chromium
- Fluoride
- Nitrates
- Sodium
- Radium
Not designed for
- Chlorine, taste and odor (handled by the carbon stages)
The membrane is one stage of your system. Chlorine must be reduced by the carbon pre-filter before water reaches it.

Where it fits
This is the membrane for our countertop reverse osmosis system and our reverse osmosis bottleless water coolers. It measures 1.75 x 11.75 in and fits a standard 2 x 12 in residential membrane housing.

Specifications
| Part number | CQE-RC-04041 |
|---|---|
| Typical life | 2 to 3 years |
| Membrane type | Thin-film composite (TFC) |
| Production rating | 50 gallons per day |
| Membrane size | 1.75 x 11.75 in |
| Operating pressure | 20 to 60 psi |
| Water temperature | 40 to 90°F |
| Made in | USA |
How to replace it
About fifteen minutes. Your system manual has the details for your model.
- Turn off the water supply and close the storage tank valve, then open the faucet to release the pressure.
- Disconnect the tubing from the membrane housing cap and unscrew the cap.
- Pull the used membrane straight out. Pliers help with the grip.
- Push the new membrane in firmly, O-ring end first, until it is fully seated.
- Refit the cap, reconnect the tubing and turn the water back on.
- Check for leaks and flush the system as your manual directs before drinking the water.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04041 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Plan on a new membrane every 2 to 3 years. Compare the TDS of your tap water and your RO water. A steady rise in the RO reading, or lower production that fresh pre-filters do not fix, means the membrane is due.
- Replace it when the TDS of your RO water rises steadily.
- Replace it when production stays low after the pre-filters are changed.
How to replace it
- Turn off the water supply and close the storage tank valve, then open the faucet to release the pressure.
- Disconnect the tubing from the membrane housing cap and unscrew the cap.
- Pull the used membrane straight out. Pliers help with the grip.
- Push the new membrane in firmly, O-ring end first, until it is fully seated.
- Refit the cap, reconnect the tubing and turn the water back on.
- Check for leaks and flush the system as your manual directs before drinking the water.
Between changes
- Replace the pre-filters on schedule. On chlorinated city water, once a year protects the membrane.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
50 GPD Reverse Osmosis Membrane FAQ
What does a reverse osmosis membrane reduce?
Total dissolved solids, including lead, mercury, cadmium, trivalent chromium, fluoride, nitrates, sodium and radium. Reduction is up to 99%.
How do I know the membrane needs replacing?
Compare the TDS of your tap water and your RO water with a TDS meter. A steady rise in the RO reading means the membrane is due.
Why must chlorine be reduced first?
Chlorine damages thin-film membranes. The carbon pre-filter reduces it before water reaches the membrane, so keep that filter current.
How often should I replace the RO membrane?
Plan on a new membrane every 2 to 3 years. Compare the TDS of your tap water and your RO water. A steady rise in the RO reading, or lower production that fresh pre-filters do not fix, means the membrane is due.
How do I replace it?
Turn off the water supply and close the storage tank valve, then open the faucet to release the pressure. Disconnect the tubing from the membrane housing cap and unscrew the cap. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
