
Water Cooler/Reverse Osmosis GAC Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Your cartridge is good for 12 to 24 months. After that, the chlorine taste and odor it was filtering start coming back through, and your membrane is left unprotected.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A sealed inline coconut shell carbon cartridge that reduces chlorine taste and odor for water coolers and reverse osmosis systems.
- Reduces chlorine taste and odor
- Typical life: 12 to 24 months
- For water coolers and RO systems
Replacement cartridge
The carbon stage that keeps taste clean
This sealed inline cartridge is filled with coconut shell granular activated carbon. Ahead of a reverse osmosis membrane it reduces chlorine before it can reach the membrane. After the storage tank it polishes away tastes and odors the water can pick up.
- Reduces chlorine taste and odor
- Coconut shell carbon
- Typical life: 12 to 24 months
- For water coolers and RO systems

What a fresh cartridge gives you
Clean taste
Reduces chlorine and the taste and odor it causes.
Membrane protection
As a pre-filter it reduces chlorine before it reaches the reverse osmosis membrane.
A fresh finish
As a post-filter it polishes tastes and odors picked up in the storage tank.
How it works
Coconut shell carbon
Granular activated carbon with a very large surface area.
Adsorption
Chlorine, VOCs and pesticides are held on the carbon as water passes.
Sealed design
Replaced as one piece, with no housing to open.
What it reduces
Designed to reduce
- Chlorine taste and odor
- VOCs
- Pesticides
- Tastes and odors from a storage tank
Not designed for
- Total dissolved solids (TDS)
- Water hardness
- Fluoride, nitrate and arsenic
- Dissolved metals
- Bacteria and viruses
Use it on water that is microbiologically safe.

Where it fits
This is the carbon stage for our bottleless water coolers, under sink reverse osmosis systems and countertop reverse osmosis system. It is plumbed on the water line and replaced as one piece.

Specifications
| Part number | CQE-RC-04038 |
|---|---|
| Typical life | 12 to 24 months |
| Media | Coconut shell granular activated carbon |
| Format | Sealed inline cartridge with a connector at each end |
| Operating pressure | 20 to 60 psi |
| Water temperature | Cold water, 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes. There is no housing to open.
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04038 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
- Replace it sooner if the taste or odor of your water changes.
- Replace it sooner if the flow or pressure drops.
How to replace it
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Between changes
- On chlorinated city water, change reverse osmosis pre-filters once a year to protect the membrane.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Inline GAC Carbon Filter Cartridge FAQ
Where does the GAC cartridge go in a reverse osmosis system?
It can sit before the membrane, where it reduces chlorine, or after the storage tank, where it polishes taste. Fit the new one where the old one was.
Does it reduce dissolved solids or fluoride?
No. In a reverse osmosis system that is the job of the membrane.
How often should I replace the carbon cartridge?
Typically every 12 to 24 months. Replace it sooner if the taste, odor, flow or pressure of your water changes. Actual life depends on your water quality and how much water you use.
How do I replace it?
Shut off the water supply to the filter line and place a towel underneath. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
