
Water Cooler/Reverse Osmosis Arsenic Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. How long this cartridge lasts depends on the arsenic in your water and how much you use. Once the media is spent, the arsenic it was filtering starts coming back through, and arsenic has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A sealed inline cartridge with arsenic-selective media for reverse osmosis, refrigerator and water cooler lines.
- Reduces arsenic
- Typical life: set by your arsenic level
- For RO, fridge and cooler lines
Replacement cartridge
A dedicated arsenic stage for the water line
This sealed inline cartridge holds an arsenic-selective media that captures arsenic as water flows through. It fits before or after a reverse osmosis system, on a refrigerator or ice maker line, or on a water cooler.
- Reduces arsenic
- Sealed inline cartridge
- Typical life: set by your arsenic level
- For RO, fridge and cooler lines

What a fresh cartridge gives you
Arsenic reduction where you drink
A dedicated stage for arsenic at the kitchen tap or on the line that feeds it.
Both forms of arsenic
The media is designed for arsenic V (arsenate) and arsenic III (arsenite).
Simple to live with
No electricity, drain line or chemicals. It works in a standard filter housing.
How it works
Iron-based media
Granules of iron hydroxide with a strong attraction for arsenic.
Adsorption
Arsenic binds to the media surface as water passes and stays there.
Replace when spent
There is nothing to regenerate. A fresh cartridge restores full capacity.
What it reduces
Designed to reduce
- Arsenic
Not designed for
- Bacteria and viruses
- Nitrate
- Fluoride
- Water hardness
- Iron
- Chlorine and chemical tastes
Arsenate, the oxidized form, is captured most readily. Use it on cold, microbiologically safe water.

Where it fits
Use it before or after a reverse osmosis system, on a refrigerator or ice maker line, or on our bottleless water coolers.

Specifications
| Part number | CQE-RC-04062 |
|---|---|
| Typical life | Set by your arsenic level and water use |
| Media | Arsenic-selective media |
| Format | Sealed inline cartridge with a connector at each end |
| Operating pressure | 20 to 60 psi |
| Water temperature | Cold water, 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes. There is no housing to open.
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04062 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
There is no fixed calendar interval. Life depends on your arsenic level and how much water you use. Test the filtered water regularly and replace the cartridge when arsenic starts to rise.
- Replace it when an arsenic test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Between changes
- Test the filtered water for arsenic on a regular schedule.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Inline Arsenic Filter Cartridge FAQ
Is this a good arsenic cartridge for well water?
Yes. Wells are where most arsenic shows up, because no utility is treating or testing the water. Start with an arsenic test.
How do I know when the cartridge is spent?
Test the filtered water. Replace the cartridge when arsenic starts to rise.
How often should I replace the arsenic cartridge?
There is no fixed calendar interval. Life depends on your arsenic level and how much water you use. Test the filtered water regularly and replace the cartridge when arsenic starts to rise.
How do I replace it?
Shut off the water supply to the filter line and place a towel underneath. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
