
Water Cooler/Reverse Osmosis Fluoride Filter Cartridge
In stock
Not sure about subscribing? Most customers tell us they signed up to stop forgetting — not to save 5%. Most households replace this cartridge about once a year. After that, the fluoride it was filtering starts coming back through, and fluoride has no taste to warn you.
Subscribe and you'll get a fresh cartridge automatically — right when the old one wears out. Cancel, pause, or change your schedule anytime in your account. No phone calls, no obligation, no fees.
A sealed inline bone char cartridge that reduces fluoride on reverse osmosis, refrigerator and water cooler lines.
- Reduces fluoride in city water
- Typical life: about 12 months
- For RO, fridge and cooler lines
Replacement cartridge
Fluoride reduction on the line, wherever you need it
This sealed inline cartridge is filled with natural bone char for fluoride. It fits before or after a reverse osmosis system, on a refrigerator or ice maker line, or on a water cooler, and is replaced as one piece.
- Reduces fluoride in city water
- Sealed inline cartridge
- Typical life: about 12 months
- For RO, fridge and cooler lines

What a fresh cartridge gives you
Fluoride reduction at the tap
Targets the inorganic fluoride added to municipal water.
A natural mineral reaction
Fluoride swaps into the mineral in bone char and is held there.
Bonus adsorption
The carbon and mineral surfaces also adsorb some heavy metals, such as lead.
How it works
Bone char
A black granular media that is 70 to 76 percent hydroxyapatite, a calcium mineral.
Mineral exchange
Fluoride reacts with the hydroxyapatite and stays in the media.
Carbon surface
About a tenth of the media is carbon, which adsorbs some metals and organic compounds.
What it reduces
Designed to reduce
- Fluoride (inorganic fluoride in municipal water)
- Heavy metals such as lead
- Some dissolved organic and colored compounds
Not designed for
- Chlorine and chemical tastes, as a dedicated stage
- Nitrate
- Water hardness
- Bacteria and viruses
It is made for the inorganic fluoride in municipal water. Use it on cold, microbiologically safe water.

Where it fits
Use it before or after a reverse osmosis system, on a refrigerator or ice maker line, or on our bottleless water coolers. For chlorine and chemicals, pair it with a SMART inline cartridge.

Specifications
| Part number | CQE-RC-04060 |
|---|---|
| Typical life | About 12 months for most households |
| Media | Calcium GAC (bone char) |
| Format | Sealed inline cartridge with a connector at each end |
| Operating pressure | 20 to 60 psi |
| Water temperature | Cold water, 40 to 90°F |
| Made in | USA |
How to replace it
A few minutes. There is no housing to open.
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Timing and care tips are in the Replacement Schedule tab. Questions about fit? Contact us.
| SKU | CQE-RC-04060 |
|---|---|
| Country of Manufacture | United States |
| On Sale | No |
When to replace it
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
- Replace it sooner if a fluoride test of the filtered water shows the level rising.
- Replace it sooner if the flow drops.
How to replace it
- Shut off the water supply to the filter line and place a towel underneath.
- Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge.
- Check that the new cartridge has the same connection style, and fit it in the same direction. The arrow on the label shows the direction of flow.
- On threaded connections, wrap the threads with thread seal tape before connecting.
- Turn the water on slowly and check each connection for leaks.
- Flush the new cartridge before first use.
Between changes
- Fluoride has no taste. A simple fluoride test of your filtered water tells you how the media is doing.
- Flush a new cartridge before first use.
- Write the install date on the cartridge label or in your calendar so the next change is easy to time.
Never run late on a change. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery.
Questions about timing? Contact us.
Inline Fluoride Filter Cartridge FAQ
Does bone char reduce fluoride in water?
Yes. Fluoride swaps into the hydroxyapatite mineral in bone char and is held there as water passes through.
Is bone char vegan?
No. Bone char is made from cattle bone.
Can I use it for fluoride in well water?
It is made for the inorganic fluoride in municipal water. For fluoride from a well or another natural source, contact us first.
How often should I replace the fluoride cartridge?
Most households replace a fluoride cartridge about once a year. Higher fluoride levels, harder water or heavier use shorten that. Fluoride has no taste, so a fluoride test of the filtered water is the reliable way to know when the media is spent.
How do I replace it?
Shut off the water supply to the filter line and place a towel underneath. Release the pressure as your system manual directs, then disconnect the fittings from the used cartridge. Fit the new cartridge, turn the water on slowly, check for leaks and flush before first use. Full steps are in the Replacement Schedule tab.
Can I have replacements delivered automatically?
Yes. Choose Subscribe and save when you order and a fresh cartridge arrives on the schedule you set, with 5% off each delivery. You can pause, change or cancel anytime in your account.
